+44 (0) 1761 234 328

(0) items

£0.00

You have no items in your shopping cart.

3326_0 42STH38 NEMA-17 Bipolar Stepper with 14:1 Gearbox

Product Code: 3326
Excl. VAT: £46.27 Incl. VAT: £55.52
  • Buy 5 for £41.86 (£50.23 incl. tax) each and save 10%
  • Buy 10 for £40.82 (£48.98 incl. tax) each and save 12%
  • Buy 50 for £38.00 (£45.60 incl. tax) each and save 18%
  • Buy 100 for £35.72 (£42.86 incl. tax) each and save 23%

This NEMA-17 motor has an integrated Planetary gearbox with a 13212/289 :1 ratio. It comes with the rear shaft exposed, so you can mount an encoder or shaft coupler.

When connected to a 1067 - PhidgetStepper Bipolar HC, the 3326 has a maximum speed of 295 RPM. At the output of the gearbox, the step angle is approximately 0.13°. When using the step angle in calculations, you should derive the exact step angle by dividing 1.8° by the gearbox reduction ratio.

At 1.7 Amps, this stepper motor can produce a maximum torque of 49 kg-cm. However, the gearbox is only rated for 30 kg-cm of continuous torque. Loading this gearbox stepper beyond the torque rating of the gearbox will shorten its useful life.

The 3326 stepper motor connects to a bipolar motor controller such as the 1067 - PhidgetStepper Bipolar HC.

The following diagram shows how to connect the motor wires to the board connectors to produce a clockwise rotation in the stepper motor when increasing position. To wire for counter-clockwise rotation when increasing position, reverse the red and blue wires.

 

Note: Make sure to unplug the power cord from the motor controller before switching wires around.

The rear shaft of this motor can be equipped with the HKT22 Optical Encoder for applications where you need to keep track of the exact position, velocity, or acceleration of the motor.

The mounting holes on this motor are compatible with the 3338 - Mounting Bracket (NEMA17).

Resources:

 

Motor Properties

Motor Type Bipolar Stepper
Manufacturer Part Number 42STH38-1684B / 36JXS60K14
Step Angle 0.13°
Step Accuracy ± 5 %
Holding Torque 30 kg·cm
Rated Torque 30 kg·cm
Maximum Speed (w/1067 Motor Controller) 295 RPM
Acceleration at Max Speed
(w/1067 Motor Controller)
1E+06 1/16 steps/sec²

Electrical Properties

Recommended Voltage 12 V DC
Rated Current 1.7 A
Coil Resistance 1.7 Ω
Phase Inductance 3.2 mH

Physical Properties

Shaft Diameter 8 mm
Rear Shaft Diameter 3.9 mm
Mounting Plate Size NEMA - 17
Weight 502 g
Number of Leads 4
Wire Length 300 mm

Gearbox Properties

Gearbox Type Planetary
Gear Ratio 13 212289 : 1
Backlash Error 1 12°
Maximum Strength of Gears 30 kg·cm
Shaft Maximum Axial Load 49.1 N
Shaft Maximum Radial Load

98.1 N

 
Warning
warning Connecting the motor directly to a power supply will destroy the motor and void the warranty. If you want to check your motor make sure it is connected to a constant current / chopper drive controller.

FeeFo Reviews

This product has no reviews yet.

Whenever possible, items which are in stock are dispatched the same day, or the next working day.

Large and/or heavy items are dispatched by UPS courier service and these orders must be placed before 15:00hrs (GMT) to ensure same day dispatch.

Small items are normally sent using a Royal Mail service for UK orders, and International Airmail or UPS for overseas orders

Returns Policy

3326_0 42STH38 NEMA-17 Bipolar Stepper with 14:1 Gearbox
0
Post your comment

Active Robots