XBee SIP Adapter, 32402

£34.68 £28.90

The XBee SIP Adapter is a fully-assembled, small-footprint solution for interfacing the most commonly-used XBee module features with your 3.3 V or 5V microcontroller.


The 2 x 5 dual SIP header makes a sturdy connection to your breadboard or through-hole board, and brings the basic connections to your prototyping area without taking up a lot of space. The more advanced XBee features are still accessible, through additional headers on the module.

Dimensions: 38.3 x 25.6 x 14.8mm when headers are attached


  • Onboard 3.3 V regulator 
  • 5V to 3.3 V logic translator buffers common I/O pins 
  • Six status indicator LEDs for Power, Tx, Rx, RSSI, Associate and mode (Sleep/ON) 
  • Small footprint dual SIP header provides support and allows easy interfacing to DOUT (TX), DIN (RX), RTS, 5 V supply and ground 
  • 5-pin female header connections provides interfacing to other XBee pins such as sleep, reset and associate 
  • A row of 10 plated through-holes with 0.1” spacing allows the option of soldering jumper wires or a header (not included) for access to the remaining XBee pins in advanced applications 
  • An additional plated through-hole gives access to 3.3 V output for ADC reference (VREF) when required 
  • Adapter board is pre-assembled - no soldering required for using most common XBee features 
  • Compatible with all Parallax microcontrollers, including the 5 V BASIC Stamp modules and 3.3 V Propeller P8X32A
  • Power requirements: 5 VDC
  • Communication: Serial pass-through to XBee module
  • Dimensions: 25.4 x 61 x 9.14mm
  • Operating temp range: -40 to +70 ┬░C