16x Isolated Solid State Relay Phidget
- Buy 5 for £52.73 £43.94 each and save 10%
- Buy 10 for £49.57 £41.31 each and save 15%
- Buy 25 for £46.51 £38.76 each and save 20%
- Buy 50 for £45.10 £37.58 each and save 23%
- Buy 100 for £40.82 £34.02 each and save 30%
Add 16 PWM-enabled solid state relay outputs to your hub.
This module is isolated from input to output.
For applications that require a ton of outputs, this module is the one you're looking for. With sixteen PWM-enabled relay outputs, not only can it handle orindary logic-level devices at 3.3V or 5V, but it can also be used to control devices of up to 30V volts and 8 amps. LED strips, DC motors, power relays, fans and other small circuits are all common loads for this type of output. The REL1101 connects to a port on a VINT Hub.
Library & Driver Downloads
|Current Consumption Min||4 mA|
|Current Consumption Max||45 mA|
|Number of Relays||16|
|Contact Resistance Max||35 mΩ|
|Turn-off Time Max||100 ns|
|Switch Type||Low Side MOSFET Switch|
|Turn-on Time Max||100 ns|
|PWM Frequency Max||28.5 kHz|
|PWM Resolution||0.5 %|
|Load Current Max (DC)||8 A|
|Load Voltage Max (DC)||30 V DC|
|Switching Power Max (Real)||* 240 W|
|Recommended Wire Size||16 - 26 AWG|
|Operating Temperature Min||-40 °C|
|Operating Temperature Max||85 °C|
* Note: At switching powers powers higher than 50W, external cooling may be required. For high power applications, a hockey-puck style SSR may be more appropriate. See the "Other Relays" tab for more details.