3268_1

3268_1 12V/17.3Kg-cm/18RPM 139:1 DC Gear Motor

£59.65 £49.71

The 3268 is a 12 volt gear motor, generating 17.3 Kg-cm of torque at 18 RPM. It's a standard-sized motor suitable for low-torque, high-speed applications.

Since this motor has a lower power output for its size, you can expect it to have a longer lifespan than other motors.

  • 8mm Shaft
  • 111.5mm Motor Length
Or

The planetary gearbox on this motor is more sophisticated than a typical spur gearbox and will provide greater efficiency, higher torque, and quieter motor operation.

The 3268 DC motor connects to either of the following controllers:

  • 1064 - PhidgetMotorControl HC
  • 1065 - PhidgetMotorControl 1-Motor

Motor Specifications at Peak Efficiency

Rated Current 650mA
Output Torque 17.3 Kg-cm
Output Power 3.8W
Rated Speed 18 RPM

Other Specifications

Rated Voltage 12VDC
Stall Current 2.4A
Torque Produced When Stalled 128 Kg-cm

Physical Properties

Motor Length (including gearbox) 111.5mm
Shaft Diameter 8mm
Weight 526g

Gearbox Specifications

Gearbox Type Planetary
Gear Reduction 139:1
Number of gear trains 3
Maximum Strength of Gears 61 Kg-cm
Maximum Shaft Overhung Load 50N
Maximum Shaft Thrust Load 35N

 

Warning !

The torque this motor produces when it stalls exceeds the rated strength of the gearbox. This means that stalling or very heavily loading this motor can cause serious damage to the gearbox. To avoid damage, avoid sudden loads or any load higher than the Maximum Strength of Gears spec.