(±1V) Voltage Input Phidget, VCP1002_0
Measure tiny voltage differences of up to ±1V with precision.
This Phidget is isolated and plugs into a VINT port.
-voltage-input-phidget-1.jpg)
This Voltage Input Phidget provides a way to measure small voltages anywhere in a circuit. It plugs directly into a VINT port and has a set of selecable voltage ranges from ±1V down to ±10mV, with smaller ranges having higher precision.
This Phidget also has an automatic mode that continuously adjusts the range based on present voltage measurements, so you'll always have the most accurate measurement possible.
The VCP1002 connects to a port on a VINT Hub.
|
Sensor Properties |
|
|
Sensor Type |
Voltage (DC) |
|
Board Properties |
|
|
Controlled By |
VINT |
|
Voltage Sensor |
|
|
Voltage Difference Max |
± 1 V DC |
|
Withstand Voltage Max |
± 50 V DC |
|
Sampling Interval Max |
60 s/sample |
|
Sampling Interval Min |
40 ms/sample |
|
Sensor Input Impedance |
1 MΩ |
|
Measurement Error Max |
0.1 % |
|
Number of Voltage Inputs |
1 |
|
Voltage Resolution |
1 mV DC |
|
±10 mV Range |
|
|
Voltage Resolution |
300 nV DC |
|
Voltage Offset Max |
25 μV DC |
|
Measurement Error Max |
0.5 % |
|
Voltage Noise |
6 μV DC |
|
±40 mV Range |
|
|
Voltage Resolution |
1.2 μV DC |
|
Voltage Offset Max |
40 μV DC |
|
Measurement Error Max |
0.25 % |
|
Voltage Noise |
25 μV DC |
|
±200 mV Range |
|
|
Voltage Resolution |
6 μV DC |
|
Voltage Offset Max |
200 μV DC |
|
Measurement Error Max |
0.25 % |
|
Voltage Noise |
100 μV DC |
|
±1 V Range |
|
|
Voltage Resolution |
28.8 μV DC |
|
Voltage Offset Max |
1 mV DC |
|
Measurement Error Max |
0.3 % |
|
Voltage Noise |
500 μV DC |
|
Electrical Properties |
|
|
Current Consumption Max |
12 mA |
|
Physical Properties |
|
|
Recommended Wire Size |
16 - 26 AWG |
|
Operating Temperature Min |
-40 °C |
|
Operating Temperature Max |
85 °C |
Documents
