+44 (0) 1761 234 328

(0) items

£0.00

You have no items in your shopping cart.

XBee Adapter Board

Product Code: 32403
Excl. VAT: £5.16 Incl. VAT: £6.19
You will earn 5 Robo Points for buying this product
This low cost adapter board is sold as a raw PCB and is perfect for interfacing any XBee or XBee Pro with the Propeller or any other 3.3 V microcontroller.

Two 10-pin sockets with 2mm spacing are included and can be soldered to the PCB for easy mounting of the XBee RF Module.

One 40-pin header with 2.54mm spacing is also included and can be soldered to the PCB for easy accommodation to breadboard applications. Board dimensions: 2.95 x 2.56cm

Kit Contents:

  • (1) XBee Adapter Board PCB 
  • (2) 1x10 2mm socket 
  • (1) 40-pin single row header 

 

Tools Required:

  • Soldering Iron
  • Solder 
  • Flux 
  • Diagonal cutters 

 

Associated Modules:

  • XBee 2mW Chip Antenna (XB24-ACI-001) 
  • XBee 2mW Wire Antenna (XB24-AWI-001) 
  • XBee Pro 60mW Chip Antenna (XBP24-ACI-001)
  •  XBee Pro 60mW Wire Antenna (XBP24-AWI-001) 

 

Note: The XBee Adapter Board includes two additional Vdd and Vss pins that are not needed for operation of the XBee RF Module. When cutting the 40-pin header, be sure to only solder the first 10 pins on each side, leaving the bottom two pins labeled Vdd and Vss not connected.

Product Attachments

View FileDigi X-CTU Users Guide    Size: (477.24 KB)

FeeFo Reviews

This product has no reviews yet.

Whenever possible, items which are in stock are dispatched the same day, or the next working day.

Large and/or heavy items are dispatched by UPS courier service and these orders must be placed before 15:00hrs (GMT) to ensure same day dispatch.

Small items are normally sent using a Royal Mail service for UK orders, and International Airmail or UPS for overseas orders

Returns Policy

XBee Adapter Board
0