RPI-CAM3-W
Raspberry Pi Camera Module 3 - 12MP with Auto Focus lens, RPI-CAM3-W
£42.00 £35.00
The latest Raspberry Pi Camera Module V3 is the new improved official camera board from Raspberry Pi.
Raspberry Pi Camera Module V3 features an ultra-high quality 12MP(megapixel) SONY IMX708 image sensor with HDR, and a phase detection autofocus lens. The new V3 camera module is capable of 4608 x 2592 pixel static images, and also supports 1080p @50fps, 720p@100fps, and 480p @120fps video.
Related Products
Check items to add to the cart or
.png)
-
The official Raspberry Pi Camera Module 3
-
Back-illuminated and stacked CMOS 12-megapixel image sensor (Sony IMX708)
-
High signal-to-noise ratio (SNR)
-
Built-in 2D Dynamic Defect Pixel Correction (DPC)
-
Phase Detection Autofocus (PDAF) for rapid autofocus
-
QBC Re-mosaic function
-
HDR mode (up to 3-megapixel output)
-
CSI-2 serial data output
-
2-wire serial communication (supports I2C fast mode and fast-mode plus)
-
2-wire serial control of focus mechanism
- 12-megapixel native resolution sensor-capable of 4608 x 2592 pixel static images
-
Supports 1080p50, 720p100 and 480p120 video
-
Small and light
-
200mm CSI FFC camera cable included
-
Size: 25mm x 24mm x 11.5mm (12.4mm for Wide lens variation)
-
Weight just over 15g
-
Connects to the Raspberry Pi board via the 15-pin FFC ribbon cable
-
Camera Module 3 can only work with the latest Picamera2 Python library, please update the Raspberry Pi OS
-
Compatible with all Raspberry Pi Computers, except the 1st version of Raspberry Pi Zero which does not comes with CSI socket
Specification:
- Sensor: Sony IMX708
- Resolution: 11.9 megapixels
- Sensor size: 7.4mm sensor diagonal
- Pixel size: 1.4μm × 1.4μm
- Horizontal/vertical: 4608 — 2592 pixels
- Common video modes: 1080p50, 720p100, 480p120
- Output: RAW10
- Autofocus system: Phase Detection Autofocus
- Dimensions: 25 x 24 x 11.5mm (12.4mm height for Wide variants)
- Ribbon cable length: 200mm
- Cable connector: 15 x 1mm FPC
