ENC4127_0
ENC4127_0 Phidgets Rotary Encoder - For 5mm Motor Shaft 1000CPR
£40.64 £33.87
This optical rotary encoder connects directly to a Phidgets Encoder Interface and is sized to mount on the rear shaft of our BLDC motors.
This optical rotary encoder sits on the 5mm rear shaft of a motor to track its position and velocity.
Features :-
- Outputs 1000 quadrature cycles per rotation
- Supports rotation speeds of up to 5000 RPM on the rear shaft
- Comes with connector attached for quick connection to Phidgets encoder interfaces
Comes Packaged With:-
- Encoder reader with Phidget encoder cable attached
- Encoder base and cap
- Encoder wheel
- Screws for mounting and assembly
- Allen key for encoder wheel set screws
Product Specifications
| Encoder Properties | |
| Manufacturer Part Number | MFT3005-E-1000B5-G05 |
| Output Circuit Type | Push-Pull |
| Controlled By | Encoder Interface |
| Encoder Resolution | 1000 CPR |
| Encoder Speed Max | 5000RPM |
| Electrical Properties | |
| Supply Voltage Min | 5 V DC |
| Supply Voltage Max | 5 V DC |
| Physical Properties | |
| Shaft Diameter | (Inner) 5 mm |
| Hex Key Size Required | 1.5 mm |
| Cable Length | 500 mm |
| Shaft Maximum Axial Load | 15 N |
| Shaft Maximum Radial Load | 25 N |
| Operating Temperature Min | -40 °C |
| Operating Temperature Max | 85 °C |
