Cytron MDD10A Driver for DC 10A 5V-30V motors (two-channels), MDD10A
Two-channel DC motor controller. Continuous current per channel is 10 A (momentary 30 A). Supply voltage is 5 V to 30 V. The controller works with logical voltage 3.3 V and 5 V (PWM and DIR) so it can be controlled by any microcontroller such as Arduino or Raspberry.
.jpg)
Two-channel DC motor controller. Continuous current per channel is 10 A (momentary 30 A). Supply voltage is 5 V to 30 V. The controller works with logical voltage 3.3 V and 5 V (PWM and DIR) so it can be controlled by any microcontroller such as Arduino or Raspberry. The controller is equipped with a 5-pin 2.54 mm input from which it receives information from the microcontroller about the direction and speed of rotation of the motors and 6 screw connectors to which the motors and power supply are connected. The Cytron MDD10A canbe controlledvia PWM and DIR inputs. Logic voltage is 3.3 Vand 5 V and iscompatible with most controllers such as Arduino, RaspberryPi, PLC.
- Supply voltage: 5 V to 30 V
- The voltage of the logical part: 3.3 V or 5 V
- Current per channel: 10 A (momentary 30 A)
- Number of channels: 2
- Full NMOS H bridge for better performance without heat sinks
- PWM speed control frequency up to 20 kHz
- 2 buttons for quick system testing
- Dimensions: 84.5 x 62 mm
- Weight: 33,5 g
- User's manual
- Arduino Library and Example (Github)
- Fritzing
- Fritzing Tutorial
- MDD10A Rev2.0 CAD file
Tutorials:
- Controlling MD10C with Arduino, shows the connections to Arduino UNO.
- Using MDD10A with Arduino
- Using MDD10A with CIKU
- Smartphone Controlled Wheel Robot
