Cytron 10Amp 7V-35V SmartDrive DC Motor Driver (2 Channels)
Two-channel intelligent DC motor controller. Continuous current per channel 10 A (momentary 30 A). Supply voltage from 7 V to 35 V. It has interfaces such as UART, PWM, RC and analog output. Suitable for building fighting robots controlled by RC remote control.
.jpg)
Two-channel intelligent DC motor controller. Continuous current per channel 10 A (momentary 30 A). Supply voltage from 7 V to 35 V. It has interfaces such as UART, PWM, RC and analog output. Suitable for building fighting robots controlled by RC remote control.
On the module there is a connector for connecting RC controllers allowing remote control of motors. Thanks to digital and analog interfaces used, module does not require additional microcontroller to work. More information in user manual.
- Supply voltage: from 7 V to 35 V DC
- Logic part voltage: from 1.3 V to 5 V
- Average current per channel: 10 A (momentary 30 A max. 1s)
- Number of channels: 2
- PWM speed control frequency up to 16 kHz
- Indicator lights: low voltage, high voltage
- Protection against overheating
- Interfaces: UART, PWM, RC, Analog
- No reverse polarity protection
- Dimensions: 101,09 x 66,8 mm
Set contains
- Cytron MD10C motor controller
- 6-pin plug and pins for the case - for self-assembly
- Plastic spacers
- 2x 3-pin cable
- Manual
