Brushed DC Motor: 6V 130-Size,11.5kRPM, 800mA Stall
This 130-size DC motor has a recommended operation voltage of 3 – 12 V and is used in the larger Pololu plastic gearmotors.
Approximate specifications at 6 V: free-run speed of 11,500 RPM, free-run current of 70 mA, and stall current of 800 mA.
- 2mm diameter round shaft
It has a recommended operating voltage of 3 – 12 V; at 6 V, the no-load speed is about 11,500 RPM, the no-load current is approximately 70 mA, and the stall current is around 800 mA.
For an estimate of the torque, note that the Pololu 228:1 plastic gearmotor produces roughly 100 oz-in of torque at 6 V using this motor, and the Pololu 120:1 plastic gearmotors produce roughly 75 oz-in of torque at 6 V.
- The output shaft has a diameter of 2 mm.
- Size: 25 x 15 x 20mm
- Weight: 18g