4x Relay Phidget
- Buy 5 for £31.64 £26.37 each and save 10%
- Buy 10 for £29.96 £24.97 each and save 14%
- Buy 25 for £27.91 £23.26 each and save 20%
- Buy 50 for £27.06 £22.55 each and save 23%
- Buy 100 for £25.86 £21.55 each and save 26%
Switch the power of up to four circuits at 210W of DC power or 1750 VA of AC power with this mechanical relay module.
Controlling the power circuits of as many as four separate devices is a snap with this relay module. Each mechanical relay can control a seperate circuit of up to 210W of DC power or 1750 VA of AC power. This module requires an external power supply, which is isolated from the VINT port in order to improve stability by preventing ground loops. The relays by nature also isolate the load circuit from the control circuit, meaning you don't have to worry about voltage spikes in the load damaging your VINT Hub or computer. The REL1000 connects to a port on a VINT Hub.
Please Note: This relay cannot be switched at its maximum AC voltage and current at the same time. Ensure that total power of the load does not exceed the switching power for the relay. For example, you can switch this relay at 277V AC and 6.3A (1750VA), or at 145V AC and 12A (1750VA), but not at 277V and 12A (3324VA).
Estimated Relay Lifespan
The lifespan of the relays on this Phidget vary depending on how much current you're switching and whether it's AC or DC. The following graph illustrates the relationship between load current and relay lifespan:
The vertical axis is the lifespan of the relay (number of actuations) and the horizontal axis is load current in amps. As you can see, increasing load current from 5A to 10A can reduce relay life by more than half.
|Number of Relays||4|
|Load Current Min||100 mA|
|Turn-off Time Max||5 ms|
|Turn-on Time Max||8 ms|
|Contact Resistance Max||50 mΩ|
|Dielectric Strength||1.5 kV AC|
|Electromagnet Coil Resistance||70 Ω|
|Switching Power Max (Real)||210 W|
|Switching Power Max (Apparent)||1.8 kVA|
|Load Voltage Max (DC)||* 30 V DC|
|Load Current Max (DC)||7 A|
|Load Voltage Max (AC)||277 V AC|
|Load Current Max (AC)||12 A|
|Current Consumption Min (VINT Port)||500 μA|
|Power Consumption||40 mW|
|Supply Voltage Min||8 V DC|
|Supply Voltage Max||30 V DC|
|Recommended Wire Size||12 - 24 AWG|
|Operating Temperature Min||-40 °C|
|Operating Temperature Max||70 °C|
*Note: Switching this relay at voltages higher than 30V will result in a reduced product lifespan.