3264_0 12V/8.4Kg-cm/28RPM 139:1 DC Gear Motor

Product Code:
3264
£27.14 £22.62
  • Buy 5 for £24.56 £20.47 each and save 10%
  • Buy 10 for £23.92 £19.93 each and save 12%
  • Buy 50 for £22.27 £18.56 each and save 18%
  • Buy 100 for £20.95 £17.46 each and save 23%

The 3264 is a 12 volt gear motor, generating 8.46 Kg-cm of torque at 28 RPM.It's a small, inexpensive motor suitable for low torque, high speed applications.This motor is quite compact considering the amout of power it can output.

  • 6mm Shaft
  • 86.5mm Motor Length
3264_0 12V/8.4Kg-cm/28RPM 139:1 DC Gear Motor
3264_0 12V/8.4Kg-cm/28RPM 139:1 DC Gear Motor

The planetary gearbox on this motor is more sophisticated than a typical spur gearbox and will provide greater efficiency, higher torque, and quieter motor operation.

The 3264 DC motor connects to either of the following controllers:

  • 1064 - PhidgetMotorControl HC
  • 1065 - PhidgetMotorControl 1-Motor

Motor Specifications at Peak Efficiency

Rated Current 410mA
Output Torque 8.46 Kg-cm
Output Power 2.9W
Rated Speed 28 RPM

 

Other Specifications

Rated Voltage 12VDC
Stall Current 1.5A
Torque Produced When Stalled 50 Kg-cm

 

Physical Properties

Motor Length (including gearbox) 86.5mm
Shaft Diameter 6mm
Weight 192g

 

Gearbox Specifications

Gearbox Type Planetary
Gear Reduction 139:1
Number of gear trains 3
Maximum Strength of Gears 30 Kg-cm
Maximum Shaft Overhung Load 35N
Maximum Shaft Thrust Load 25N

 

Warning !

The torque this motor produces when it stalls exceeds the rated strength of the gearbox. This means that stalling or very heavily loading this motor can cause serious damage to the gearbox. To avoid damage, avoid sudden loads or any load higher than the Maximum Strength of Gears spec.

Product Enquiry