1012_2B Phidget Interface 0/16/16

Product Code:
1012_2B
£110.81 £92.34
  • Buy 5 for £100.19 £83.49 each and save 10%
  • Buy 10 for £94.19 £78.49 each and save 15%
  • Buy 50 for £85.69 £71.41 each and save 23%
  • Buy 100 for £77.57 £64.64 each and save 30%

Use it to check the state of switches and push buttons, and/or to switch relays, solenoids, and LEDs.

1012_2B Phidget Interface 0/16/16 1012_2B Phidget Interface 0/16/16 dimensions
1012_2B Phidget Interface 0/16/16

Digital Inputs

The Digital Inputs are activated by an external voltage source, triggering on a wide voltage range: 4 to 30VDC. They provide built-in filtering, to eliminate false triggering from electrical noise. They can be used to convey the state of on/off devices, such as push buttons, limit switches, relays.

Digital Outputs

The Open Collector Digital Outputs can be used to directly control substantial devices, switching up to 30VDC at up to 2 Amps. The Output acts as a switch to ground, so the circuit you're switching will need an external power supply.

Each output is protected from transient voltages typical when switching inductive devices - relays, solenoids, motors. The Outputs can be used to directly control devices requiring substantial power such as incandescent lights, high power LEDs, relays, solenoids, motors.

Comes Packaged with

Hardware

 

  • Hardware mounting kit:
  • 4x M3 Bolts (2cm Length)
  • 4x Plastic spacers (5mm Length)
  • 4x M3 Nuts

Board

Controlled By

USB

API Object Name

DigitalInput, DigitalOutput

USB Voltage Min

4.6 V DC

USB Voltage Max

5.5 V DC

Current Consumption Min

14 mA

Current Consumption Max

500 mA

Available External Current

394 mA

Recommended Wire Size

16 - 26 AWG

USB Speed

Low Speed

Operating Temperature Min

0 °C

Operating Temperature Max

70 °C

Digital Inputs

Number of Digital Inputs

16

Digital Input Impedance

10 kΩ

Low Voltage Max (False)

900 mV DC

High Voltage Min (True)

4.2 V DC

Low Voltage Trigger Length Min

16 ms

High Voltage Trigger Length Min

4 ms

Digital Input Voltage Max

± 30 V DC

Digital Input Update Rate

125 samples/s

Relay Properties

Number of Relays

16

Series Resistance

200 mΩ

Open Collector Voltage Max

30 V DC

Digital Output Current Sinking Max

(per channel) 2 A

Product Enquiry