+44 (0) 1761 234 328

(0) items

£0.00

You have no items in your shopping cart.

Pololu Jrk 12v12

Product Code: 1393
Excl. VAT: £79.78 Incl. VAT: £95.74

The powerful Jrk 12v12 motor controller is a highly configurable brushed DC motor controller that supports four interface modes: USB, logic-level serial, analog voltage, and hobby radio control (RC).


The controller can be used as an open-loop speed control or for closed-loop speed or position control. 

The continuous output current is approximately 12 A (30 A max) and the operating range of 6–16 V (with transient protection up to 40 V).

Analog voltage and tachometer (frequency) feedback options allow quick implementation of closed-loop servo systems, and a free configuration utility (for Windows XP or Vista) allows easy calibration and configuration through the USB port.

Pololu Qik 2s12v10 Dual Serial Motor Controller

Key improvements over competing products and earlier Pololu motor controllers with feedback include:

  • USB connectivity with emulated serial (COM) port allows direct motor control from a PC.
  • Ultrasonic PWM to eliminate switching-induced motor shaft hum or whine.
  • Robust, high-speed communication protocol with user-configurable error condition response.
  • High internal resolution (12 bits) for smooth and flexible calibration to various input and feedback devices.
  • Current sensing and limiting.
  • Reversed power protection.
  • Field-upgradeable firmware.

Main Features of the Jrk 12v12

Pololu Qik 2s12v10 Dual Serial Motor Controller

    • Simple bidirectional control of one DC brush motor.
    • 6 V to 16 V operating supply range.
    • 12 A maximum continuous current output (30 A peak).
    • Four communication or control options:
      • USB interface for direct connection to a PC.
      • Full-duplex, TTL-level asynchronous serial interface for direct connection to microcontrollers or other embedded controllers.
      • Hobby radio control (RC) pulse width (PWM) interface for direct connection to an RC receiver or RC servo controller.
      • 0–5 V analog voltage interface for direct connection to potentiometers and analog joysticks.
    • Two closed-loop feedback options:
      • 0–5 V analog voltage.
      • Frequency/tachometer digital input up to 2 MHz with 1 ms PID period.
      • (Open-loop control with no feedback also available.)
      • Simple configuration andcalibrationover USB with free configuration program (Windows XP and Vista compatible).
      • Configurable parameters include:
        • PID period and PID constants (feedback tuning parameters).
        • Maximum current.
        • Maximum duty cycle.
        • Maximum acceleration.
        • Error response.
        • Input calibration (learning) for analog and RC control.
      • Optional CRC error detection eliminates communication errors caused by noise or software faults.
      • Reversed power protection.
      • Field-upgradeable firmware.
      • Optional feedback potentiometer disconnect detection.
The Input tab of the Jrk Configuration Utility The jrk plot window, showing all variables simultaneously.

Included Hardware

The jrk ships with a 14×1 straight 0.100" male header strip and two 5mm, 2-pin terminal blocks. To provide maximum flexibility, none of these parts are soldered to the board.

For the most compact installation, you can solder wires directly to the jrk pads themselves and skip using the included hardware. The included hardware allows you to make less permanent connections. You can break the 14×1 header strip into an 8×1 piece and two 3×1 pieces and solder these strips into the jrk’s I/O pads.

NOTE: USB CABLE NOT INCLUDED

Motor channels: 1
Operating voltage: 6-16V
Continuous output current: 12 A
Peak output current: 30 A
Auto-detect baud rate range: 300 – 115,200 bps
Available fixed baud rates: 300 – 115,200 bps
Available PWM frequencies: 20 kHz, 5 kHz
Reverse voltage protection?: Yes
USB connector style: USB Mini-B

Product Attachments

View FileJRK USB Motor Controller Users Guide    Size: (1.08 MB)
View FileDrivers and Configuration Utility    Size: (4.81 MB)

FeeFo Reviews

This product has no reviews yet.

Whenever possible, items which are in stock are dispatched the same day, or the next working day.

Large and/or heavy items are dispatched by UPS courier service and these orders must be placed before 15:00hrs (GMT) to ensure same day dispatch.

Small items are normally sent using a Royal Mail service for UK orders, and International Airmail or UPS for overseas orders

Returns Policy

Pololu Jrk 12v12
0
Post your comment

Active Robots