Measure -40 to 400°C with this stainless steel K-type thermocouple probe. Since the end of the thermocouple is enclosed, it is ideal for measuring liquids. The thermocouple junction is ungrounded, meaning it is isolated from the outer sheath and more resistant to environmental noise.
If you need to fix it to a panel or mount it inside an enclosure, have a look at the HDW4100-1/8" Mounting Nut or the HDW4101-M12 Mounting Nut.
Note: Beyond the 11cm tip, this thermocouple is not waterproof.
This thermocouple connects quickly and easily to any of the following Phidget thermocouple interfaces:
- 1051 Phidgettempraturesensor 1-Input
- 1048 Phidgettempraturesensor 4-Inpit
On the 1051, connect the white thermocouple wire to (-) terminal block and the red wire to the + terminal block.
On the 1048, connect the white wire to G and the red wire to an input terminal block (numbered 0 to 3).
|Ambient Temperature Min
|Ambient Temperature Max
|Ambient Temperature Min (Momentary)
|Ambient Temperature Max (Momentary)
|Ambient Temperature Error Max