3532_0 Hollow Shaft Optical Encoder IHC3808
Product Code:
3532
£112.37
£93.64
- Buy 5 for £101.63 £84.69 each and save 10%
- Buy 10 for £99.14 £82.62 each and save 12%
- Buy 50 for £92.24 £76.87 each and save 18%
- Buy 100 for £86.75 £72.29 each and save 23%
Ideal for use with motors, this hollow-shaft encoder fits easily onto an 8mm shaft.
This sturdy optical quadrature encoder can be attached to the 8mm rear shaft of a motor without need for a shaft coupler.
IIt has 360 counts (full quadrature cycles) per rotation and can be installed easily by fitting it over the shaft and tightening the set-screw. This encoder makes use of the index channel, sending one pulse for every full rotation.
- Includes mounting screws and washers
Quadrature Encoder
- 360 counts per revolution
- Index Channel
- Push-pull Output
- Hollow shaft installation
| Function | 3532 - Encoder | 3019 - Phidget cable |
|---|---|---|
| +5V | Red | Red |
| Ground | Black | Black |
| Data (A) | Green | White |
| Data (B) | White | Brown |
| Index (Z) | Yellow | Green |
Encoder Properties
| Output Circuit Type | Push-Pull (Single-Ended) |
| Encoder Resolution | 360 CPR |
| Encoder Speed Max | 4500 RPM |
Electrical Properties
| Supply Voltage Min | 5 V DC |
| Supply Voltage Max | 5 V DC |
| Output Frequency Max | 100 kHz |
Physical Properties
| Shaft Diameter | (Inner) 8 mm |
| Shaft Maximum Axial Load | 10 N |
| Shaft Maximum Radial Load | 20 N |
| Operating Humidity Min | 30 %RH |
| Operating Humidity Max | (Non-condensing) 85 %RH |
| Operating Temperature Min | -10 °C |
| Operating Temperature Max | 70 °C |
| IP Rating | IP54 |
| Weight | 121 g |
You may also like...
Check items to add to the cart or
select all
