SF11-C Laser Rangefinder 120 m

Product Code:
28054
£409.92 £341.60

The lightweight, compact LightWare SF11-C is an ideal laser altimeter for UAVs, such as the ELEV-8 v3 Quadcopter Kit.  It can also serve as a highly effective rangefinder in a variety of applications. Its time-of-flight system makes accurate distance measurements that are not affected by speed, wind, changes in barometric pressure, noise, ambient light, or air temperature. 

Use our Aluminum Stand Kit for SF Lasers to mount the SF11 on a wheeled UAV or stationary application.

SF11-C Laser Rangefinder 120m front view SF11-C Laser Rangefinder 120m top down view SF11-C Laser Rangefinder 120m
SF11-C Laser Rangefinder 120m front view

For a quick test, simply connect the SF11-C's USB port to your computer with the included 18" USB A to Micro-B Cable. Open a serial terminal and set it to 115,200 kbps; formatted distance readings are immediately available.

Key Features:

  • Outputs 16 readings per second for very quick data refresh
  • Multiple interfaces for use with different types of flight controllers or other embedded systems
  • Configurable baud rate 9600-115200
  • Ready to use with no calibration needed
  • Set optional configurations with the free LightWare Terminal Software
  • 18" (46 cm) USB A to MicroB cable and 7-wire cable/plug included

Application Ideas:

  • Altimeter for the ELEV-8 v3 Quadcopter and other UAVs, detecting distance between craft and ground
  • Calculating speed of moving objects or vehicles
  • Measuring depth of materials (snow, fluid, sand) from above
  • Counting passing objects in a monitoring or control system

Note: The SF11-C supersedes the discontinued SF10 series: SF10/A 25m #28051; SF10/B 50m #28052; SF10/C 100m #28053.

Note: The SF11-C is a Class 1M laser under Food and Drug Administration Guidelines. Class 1M lasers are considered non-hazardous unless viewed with optical aids including magnifiers, binoculars or telescopes. Do not aim at persons or animals. Do not look at the beam directly with optical instruments including magnifiers, binoculars or telescopes.

  • Range over natural targets: 0–120 meters
  • Range over moving water: 0–40 meters
  • Resolution: 1 cm
  • Update rate: 16 readings per second
  • Accuracy: ±0.1 m (70% reflective target @ 20°C)
  • Laser power: 20 W (peak), <15 mW (average), Class 1M
  • Approvals: FDA: 1410968-002 (2016/01)
  • Optical aperture: 51 mm
  • Beam divergence: 0.2°
  • Lens material: Acrylic
  • Connections : Plug & socket, micro USB
  • Communication: 3.3 V CMOS Serial, I2C & analog with max. latency of 65 ms
  • Voltage requirements: 5.0 VDC
  • Current requirements: 200 mA (maximum)
  • Weight: 35 g
  • Dimensions: 30 x 56.5 x 50 mm
  • Operating temperature: 32 to 104 °F (0 to 40 °C)

Note: As an importer of this laser product, Parallax’s supplier has completed the necessary FDA Dealer and Distributor records in Title 21, Subpart E.  Purchase this sensor from Parallax and receive our warranty, customer service, and quick shipment.  FDA: 1410968-002 (2016/01)

SF11 Laser Manual

SF10/SF11 Laser Rangefinder Arduino Code Example

SF10/SF11 Laser Rangefinder Spin Code Example

SF10/SF11 Laser Rangefinder C Code Example

SF10/SF11 Laser Rangefinder BS2 Code Example

LightWare Terminal Software (Offsite)

Product Enquiry