Analogue Temperature Sensor
Only 1 left
The TSA01 is a voltage output temperature sensor module employing Microchip's MCP9700A sensor.
Power - 2.3v to 5.0v, >6uA (typical)
Output - 10.0 mV/°C (typical)
Output Voltage at 0°C - 500mV
Range - -40°C to +125°C
Accuracy - ±1°C (typ.) ±2°C (max.), 0°C to +70°C
The TSA01 should be connected to your controller using shielded twin core cable.
The shield is the 0v ground connection.
One of the cores carries the supply voltage, marked as 5v on the PCB.
The other core carries the temperature voltage, marked as T on the PCB.
Do not power the module from a higher voltage as there are ESD protection diodes on the board that start conducting at around 6v.