You have no items in your shopping cart.
Product Code: SEN-11486Excl. VAT: £22.50 Incl. VAT: £27.00
The SparkFun 9DOF MPU-9150 is the world’s first 9-axis MotionTracking MEMS device designed for the low power, low cost, and high performance requirements of consumer electronics equipment including smartphones, tablets and wearable sensors. And guess what? You get to play with it.
This breakout board makes it easy to prototype with the InvenSense MPU-9150 by breaking out all the pins you need to standard 0.1" spaced headers. The board also provides I2C pullup resistors and a solder jumper to switch the I2C address of the device.
Product Code: MR003-010.1Excl. VAT: £8.20 Incl. VAT: £9.84
This carrier board has been developed for the Freescale MMA8451Q 3-axis accelerometer, a great low-g sensor with 14-bit digital output, I2C communication and adjustable sensitivity (±2g, ±4g or ±8g), and it includes all the external components required by the sensor.
Its very small size (17.8x12.7mm) and its very light weight (only 1g), make it the perfect peripheral for small robots and for motion sensing systems.
Product Code: MR003-002.1Excl. VAT: £8.36 Incl. VAT: £10.03
This carrier board has been developed for the Freescale MMA7361L XYZ-axis accelerometer, a great low-g sensor with analog voltage outputs and adjustable sensitivity (±1.5g or ±6g), and it includes all the external components required by the sensor.
Its very small size (25.4x12.7mm) and its very light weight (only 1.1g), make it the perfect peripheral for small robots and for motion sensing systems.
Product Code: 2738Excl. VAT: £12.85 Incl. VAT: £15.42
The Pololu MinIMU-9 v5 is an inertial measurement unit (IMU) that packs an LSM6DS33 3-axis gyro and 3-axis accelerometer and an LIS3MDL 3-axis magnetometer onto a tiny 0.8″ × 0.5″ board.
An I²C interface accesses nine independent rotation, acceleration, and magnetic measurements that can be used to calculate the sensor’s absolute orientation.
The MinIMU-9 v5 board includes a voltage regulator and a level-shifting circuit that allow operation from 2.5 to 5.5 V, and the 0.1″ pin spacing makes it easy to use with standard solderless breadboards and 0.1″ perfboards.
Product Code: 101020051Excl. VAT: £9.59 Incl. VAT: £11.51
The ADXL335 is a small, thin, low power, complete 3-axis accelerometer with signal conditioned voltage outputs.
The product measures acceleration with a minimum full-scale range of ±3 g.
Product Code: 101020039Excl. VAT: £9.66 Incl. VAT: £11.59
3-Axis Digital Accelerometer is the key part in projects like orientation detection, gesture detection and Motion detection.
This 3-Asix Digital Accelerometer(±1.5g) is based on Freescale's low power consumption module, MMA7660FC.
Product Code: SEN-12803Excl. VAT: £15.79 Incl. VAT: £18.95The ADXL377 is a small, thin, low power, complete 3-axis accelerometer with signal conditioned analog voltage outputsAdd to Compare
Product Code: SEN-12786Excl. VAT: £8.30 Incl. VAT: £9.96
The ADXL337 is a small, thin, low power, complete 3-axis accelerometer with signal conditioned analog voltage outputs that measures acceleration with a full-scale range of ±3g.
Minimal Price: £1.68