Line Follower for GoPiGo
The Line Follower attaches to your GoPiGo robot car and enables you to program it to follow a line.
Program your GoPiGo to serve a drink across a room, and learn the basics of how automated warehouse or self-driving cars work!
This works out of the box with GoPiGo2, but if you have the GoPiGo1, please email us through our contact form and we will send you an adapter. If you aren’t sure which one you have, check and see if you have velcro to hold on the battery pack — if so, you have the GoPiGo2.
- Line Follower board
- (2) hex spacers
- (1) sensor cable
- (2) round acrylic spacers
- (1) acrylic sensor protector
- (2) long bolts
- (2) short bolts
Essential to any robot learning kit is a line follower! We are introducing this sensor for the Raspberry Pi. The sensor is an easy way to direct your robot around the floor of a classroom, your kitchen, or your office. Just lay down some tape and start the line following program! The sensor can detect black lines on a light background, or white lines on a dark background. The Raspberry Pi Line tracker uses five line trackers, with the middle sensor aligned directly above the line, to give you precise and quick control of the robot. The line tracker allows you to build a robot to follow a path that is pre-marked with tape, paint, or a marker, and allows you to control the robot indirectly while it is moving autonomously. The line tracker turns the robot into an autonomously navigating machine that follows a line-marked path.