(0) items

£0.00

You have no items in your shopping cart.

Robot Parts

Designing a robot from scratch can be a very rewarding project, but can be a little overwhelming to the beginner robot builder. Chassis kits provide a good starting point to which you can add your choice of parts. Some platforms include wheels, motors and parts bundles. If you are creative, consider making your own base with the easy to use Sintra PVC boards. Perhaps design your own robot arm or a walking robot, using the large assortment of aluminium hardware brackets, rails and plates. Arm gripper kits and robot leg kits are available too.

Our small electronic kits are ideal for beginners as an introduction to the techniques of soldering components and simple circuit boards. To power your robot, batteries are available in different types and sizes. Perhaps consider a solar powered robot? Solar panels are a great alternative and can be linked in series or parallel to increase voltage and current. Linking batteries in series increases voltage while linking in parallel increases the available current.

21 to 30 of 452 total

Grid  List 

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1. Hex Key 7/64 inch

    Hex Key 7/64 inch

    Product Code: 7122A17
    Excl. VAT: £0.87 Incl. VAT: £1.04

    The hex key is made from strong alloy steel and has a black oxide finish.

    Suitable for 6-32 Socket Head Screws.

    Read more

    Add to Compare
  2. 2mm 10pin XBee Socket

    2mm 10pin XBee Socket

    Product Code: MR301-001
    Excl. VAT: £0.38 Incl. VAT: £0.46

    This is a 10-pin socket with 2mm pitch that mates with the popular XBee radio from Digi. Use this small part to avoid having to solder your precious radio to a PCB.

    Read more

    Add to Compare
  3. EXTENDER

    EXTENDER

    Product Code: EXTENDER
    Excl. VAT: £9.10 Incl. VAT: £10.92

    Extender to connect two NXT Cables to increase effective length.

    Read more

    Add to Compare
  4. Energy Harvester - LTC3588 Breakout

    Energy Harvester - LTC3588 Breakout

    Product Code: BOB-09946
    Excl. VAT: £18.50 Incl. VAT: £22.20

    This breakout board uses the LTC3588 Piezoelectric Energy Harvester from Linear Technologies.

    This board can be used not only for harvesting piezoelectric energy, but solar energy as well.

    Read more

    Add to Compare
  5. Arduino Channel Snap Mount

    Arduino Channel Snap Mount

    Product Code: 585008
    Excl. VAT: £2.27 Incl. VAT: £2.72

    The Arduino Channel Snap Mount provides a quick and simple way to attach an Arduino (Uno or Mega) micro controller to your Actobotics structure.

    • 2 in a pack

    Read more

    Add to Compare
  6. RaspberryPi Channel Snap Mount

    RaspberryPi Channel Snap Mount

    Product Code: 585012
    Excl. VAT: £2.27 Incl. VAT: £2.72

    The Raspberry Pi Channel Snap Mount provides a quick and simple way to attach a Raspberry Pi micro controller to your Actobotics structure.

    • 2 in a pack

    Read more

    Add to Compare
  7. Arduino Component Mount

    Arduino Component Mount

    Product Code: 585010
    Excl. VAT: £2.47 Incl. VAT: £2.96

    The Arduino Component mount allows for easy attachment of Actobotics components to an Arduino (Uno or Mega) board.

    Read more

    Add to Compare
  8. 9 Degrees of Freedom Breakout - MPU-9150

    9 Degrees of Freedom Breakout - MPU-9150

    Product Code: SEN-11486
    Excl. VAT: £22.50 Incl. VAT: £27.00

    The SparkFun 9DOF MPU-9150 is the world’s first 9-axis MotionTracking MEMS device designed for the low power, low cost, and high performance requirements of consumer electronics equipment including smartphones, tablets and wearable sensors. And guess what? You get to play with it.

    This breakout board makes it easy to prototype with the InvenSense MPU-9150 by breaking out all the pins you need to standard 0.1" spaced headers. The board also provides I2C pullup resistors and a solder jumper to switch the I2C address of the device.

    Datasheet

    Schematic

    Eagle Files

    Read more

    Add to Compare
  9. Tilt-a-Whirl Breakout - RPI-1031

    Tilt-a-Whirl Breakout - RPI-1031

    Product Code: SEN-12011
    Excl. VAT: £3.80 Incl. VAT: £4.56
    The RPI-1031 tilt sensor is capable of sensing a change in orientation in four different directions: forward, back, left or right.

    Read more

    Add to Compare
  10. 4 pack Center Hole Adaptor

    Center Hole Adaptors (633118)

    Product Code: 633118
    Excl. VAT: £1.59 Incl. VAT: £1.91

    Center Hole Adaptors (633118) - Pack of 4

    • For use with Servocity/Actobotics Channel and Channel Brackets
    • Makes it easy to mount wheels/shafts to Channel
    • 0.140" inside diameter

    Read more

    Add to Compare

21 to 30 of 452 total

Grid  List 

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
Robot Parts

Minimal Price: £0.08

0

Enquiry Us

Post your comment

Active Robots