(0) items

£0.00

You have no items in your shopping cart.

Robot Parts

Designing a robot from scratch can be a very rewarding project, but can be a little overwhelming to the beginner robot builder. Chassis kits provide a good starting point to which you can add your choice of parts. Some platforms include wheels, motors and parts bundles. If you are creative, consider making your own base with the easy to use Sintra PVC boards. Perhaps design your own robot arm or a walking robot, using the large assortment of aluminium hardware brackets, rails and plates. Arm gripper kits and robot leg kits are available too.

Our small electronic kits are ideal for beginners as an introduction to the techniques of soldering components and simple circuit boards. To power your robot, batteries are available in different types and sizes. Perhaps consider a solar powered robot? Solar panels are a great alternative and can be linked in series or parallel to increase voltage and current. Linking batteries in series increases voltage while linking in parallel increases the available current.

1 to 10 of 446 total

Grid  List 

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1. Logic Level Converter Bi-Directional

    Logic Level Converter Bi-Directional

    Product Code: BOB-12009
    Excl. VAT: £2.15 Incl. VAT: £2.58

    If you've ever tried to connect a 3.3V device to a 5V system, you know what a challenge it can be.

    The SparkFun logic level converter is a small device that safely steps down 5V signals to 3.3V and steps up 3.3V to 5V.

    • Dimensions: 0.63 x 0.52" (16.05 x 13.33mm)

    Read more

    Add to Compare
  2. SPT100 PAN AND TILT SYSTEM

    SPT100 PAN AND TILT SYSTEM

    Product Code: SP-100PAN/TILT
    Excl. VAT: £19.73 Incl. VAT: £23.68

    The SPT100 Pan and Tilt System is perfect for cameras or sensors up to 10 oz

    • Weight (no servos): 1.5 oz.
    • Tray Swing: 135°
    • Servos: 2 Standard Size (Hitec or Futaba)
    • Maximum Payload Weight: 10 ounces
    • Position: Hanging, Upright or Sideways

    Read more

    Add to Compare
  3. SPT200 PAN AND TILT SYSTEM

    SPT200 PAN AND TILT SYSTEM

    Product Code: SPT-200PAN/TILT
    Excl. VAT: £47.00 Incl. VAT: £56.40

    SPT200 Direct Drive Pan & Tilt System is perfect for cameras or sensor up to 2lbs.

    • Weight (no servos): 5.5 oz.
    • Tray Swing: 135°
    • Servos: 2 Standard Size (Hitec or Futaba) not included
    • Maximum Payload Weight: 2 pounds
    • Position: Hanging, Upright or Sideways

    Read more

    Add to Compare
  4. SparkFun Micro OLED Breakout

    SparkFun Micro OLED Breakout

    Product Code: LCD-13003
    Excl. VAT: £10.80 Incl. VAT: £12.96

    The SparkFun Micro OLED Breakout Board breaks out a small monochrome, blue-on-black OLED. It’s “micro”, but it still packs a punch – the OLED display is crisp, and you can fit a deceivingly large amount of graphics on there.

    This breakout is perfect for adding graphics to your next Arduino project, displaying diagnostic information without resorting to serial output, and teaching a little game theory while creating a fun, Arduino-based video game. Most important of all, though, is the Micro OLED is easy to control over either an SPI or I2C interface.

     

    Read more

    Add to Compare
  5. Hub Adaptor A

    Hub Adaptor A

    Product Code: 545440
    Excl. VAT: £2.95 Incl. VAT: £3.54

    Hub Adaptor A ,utilises a .770X.770 hub pattern . This Hub adaptor uses 6/32" socket head machine screws (sold separately).

    • Sold individually

    Read more

    Add to Compare
  6. Hub Adaptor D

    1.50" - 0.770" Pattern Adapter

    Product Code: 545388
    Excl. VAT: £4.92 Incl. VAT: £5.90

    This pattern adapter is designed to allow you to attach parts with the 1.50" hub pattern to parts with the 0.770" hub pattern

    Read more

    Add to Compare
  7. 1/8" to 1/8" Clamping Shaft Coupler

    1/8" to 1/8" Clamping Shaft Coupler

    Product Code: CSC-125-125
    Excl. VAT: £12.85 Incl. VAT: £15.42

    Clamping Shaft Couplers are an inexpensive way to attach or lengthen shafts

    • Length: .650" 
    • Diameter: .625"
    • Bore: 1/8" to 1/8"

    Read more

    Add to Compare
  8. 1/8" to 3/16" Clamping Shaft Coupler

    1/8" to 3/16" Clamping Shaft Coupler

    Product Code: CSC-125-187
    Excl. VAT: £12.85 Incl. VAT: £15.42

    Clamping Shaft Couplers are an inexpensive way to attach or lengthen shafts

    • Length: .650" 
    • Diameter: .625"
    • Bore: 1/8" to 3/16"

    Read more

    Add to Compare
  9. 1/8" to 1/4" Clamping Shaft Coupler

    1/8" to 1/4" Clamping Shaft Coupler

    Product Code: CSC-125-250
    Excl. VAT: £12.85 Incl. VAT: £15.42

    Clamping Shaft Couplers are an inexpensive way to attach or lengthen shafts.

    • Length: .650" 
    • Diameter: .625"
    • Bore: 1/8" to 1/4"

    Read more

    Add to Compare
  10. 1/8" to 5/16" Clamping Shaft Coupler

    1/8" to 5/16" Clamping Shaft Coupler

    Product Code: CSC-125-312
    Excl. VAT: £12.85 Incl. VAT: £15.42

    Clamping Shaft Couplers are an inexpensive way to attach or lengthen shafts

    • Length: .650" 
    • Diameter: .625"
    • Bore: 1/8" to 5/16" 

    Read more

    Add to Compare

1 to 10 of 446 total

Grid  List 

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
Robot Parts

Minimal Price: £0.08

0

Enquiry Us

Post your comment

Active Robots