3702_0 Wi-Fi USB Adapter w/SMA Antenna
The wireless USB adapter comes with a removable antenna and is fully compatible with 802.11b/g Wi-Fi standards.
Phidgets ran throughput tests on this adapter running on the 1073 - PhidgetSBC3 using the Iperf network testing tool. At a range of approximately 10 meters through walls in our office, an average of 4.17 Mbps was recorded. Throughput depends on many variables including the performance of the computer running it and the operating system being used. You can read more of our test results here.
This adapter connects to the 1072 - PhidgetSBC2
Connect the antenna to the dongle using the SMA connector, and then plug the adapter into a USB port on the 1072 – PhidgetSBC2 using the Extender Cable. If you're using the 1073 - PhidgetSBC3, we recommend the 3703 - Wi-Fi USB Adapter 802.11n.
The Wi-Fi comes packaged in a resealable plastic bag and includes:
- A Wi-Fi dongle adapter
- An RP-SMA Antenna
- A 3704 - USB Extension Cable 30cm
|Wireless Communication Standard||IEEE802.11b/g|
|Communication Frequency||2.4 GHz|
|Antenna Gain||3 dBi|
|Transmitter Power Max||15 dBm|
|Transmission Range Max (Noisy Environment)||30 m|
|Transmission Range Max (Optimal Environment)||200 m|
|I/O Communication Protocol||USB 2.0 / 1.1|
|Data Rate Average||4.2 Mbit/s|
|Current Consumption Max||200 mA|
|Operating Temperature Min||-20 °C|
|Operating Temperature Max||60 °C|
|Connector A||USB Male A|
|Connector B||RP SMA Female Jack|