Pololu Digital Distance Sensor 10cm
This small lidar-based distance sensor detects the presence objects within 10 cm (4″).
It has a single digital output that drives low when an object is being detected; otherwise, it is high. It works over an input voltage range of 3.0 V to 5.5 V, and the 0.1″ pin spacing makes it easy to use with standard solderless breadboards and 0.1″ perfboards.
This compact sensor is a great way to quickly detect the presence of nearby objects. As long as the sensor is enabled, it takes continuous distance measurements and uses a single digital output to indicate if it detects an object within its detection range. The output is driven low when the sensor detects an object; otherwise, the output is high.
Please note that this sensor will only tell you if there is an object within the detection range along its line of sight, not how far away it is. As shown in the diagram above, there is hysteresis at the maximum range threshold to help ensure a clean transition as objects cross the threshold.
Unlike simpler optical sensors that use the intensity of reflected light to detect objects, this sensor uses a short-range lidar module to precisely measure how long it takes for emitted pulses of infrared, eye-safe laser light to reach the nearest object and be reflected back. This allows the sensor performance to be largely independent of object reflectivity and ambient lighting conditions (though the range can be reduced for extremely low-reflectance objects).
Some example applications include:
- break-beam sensor or photogate alternative
- non-contact bumper or obstacle detector for a robot
- non-contact interface element for activating a device or process
- a counter or timer of objects as they pass by
|Size:||0.85" x 0.35" x 0.122"|
|Sampling rate:||115Hz ¹|
|Minimum operating voltage:||3.0V|
|Maximum operating voltage:||5.5V|
|Supply current:||30mA ²|
|Output type:||Digital ³|
2 Typical average current draw when enabled; disabling via the EN pin reduces it to around 0.4 mA
3 Low when detecting an object, high otherwise.
|Pololu Distance Sensor with Pulse Width Output, 50cm Max||
This small lidar-based distance sensor reports the distance of objects up to about 50 cm (20″) away with a pulsed signal similar to a hobby servo control signal.View Detail...
|Pololu Digital Distance Sensor 15cm||
This small lidar-based distance sensor detects the presence objects within 15 cm (6″).View Detail...
|Pololu Digital Distance Sensor 5cm||
This small lidar-based distance sensor detects the presence of objects within 5 cm (2″).