3525_0 Photoelectric Proximity Sensor 10m
- Buy 5 for £59.78 £49.82 each and save 10%
- Buy 10 for £58.32 £48.60 each and save 12%
- Buy 50 for £54.26 £45.22 each and save 18%
- Buy 100 for £51.04 £42.53 each and save 23%
The 3525 uses the most reliable and accurate style of photoelectric sensing which is the through beam sensor.
The sensor comes with an emitter and a receiver. The emitter provides a constant invisible IR (infrared) beam of light to the receiver and detection occurs when an object passing between the two breaks the beam.
The photo detection range of the 3525 is up to 10 meters.
A very familiar application of a through beam photoelectric sensor can be found is right in your home. Quite often, a garage door opener has a through beam photoelectric sensor mounted near the floor, across the width of the door. This sensor is making sure nothing is in the path of the door when it is closing.
The Phidgets Digital Input is "off" when the receiver receives the transmitter signal (i.e. there are no objects between the transmitter and the receiver); the Digital Input is "on" when the beam is broken by the presence of an object.
- Through Beam Emitter and Receiver using an Infrared LED
- Standard Detecting Distance: 10m
- NPN, Normally Open (NO) Output
- PVC Cable 2m
- Requires a 12 to 30VDC Power Supply
You need to provide 12VDC to the Transmitter. The brown wire is +V and the blue wire is GND.
|Light Source||Infrared LED (Modulated)|
|Output||NPN Normally Open (NO)|
|Power Supply||10 to 30VDC|
|Response Time||Max. 3ms|
|Operating Indicator||Emitter - Green LED|
|Operating Indicator||Receiver - Yellow LED|
|Connection||PVC Cable 2m|
|Ambient Temperature||-25°C to +55°C|
|Protection Degree||IEC IP67|