3530_0 Phidget Optical Rotary Encoder
Product Code:
3530
£66.10
£55.08
- Buy 5 for £59.78 £49.82 each and save 10%
- Buy 10 for £58.32 £48.60 each and save 12%
- Buy 50 for £54.26 £45.22 each and save 18%
- Buy 100 for £51.04 £42.53 each and save 23%
This is a small, economical, ball bearing construction, rotary encoder without index that goes up to 3000 rpm.
Phidget Optical Rotary Encoder
This is a small, economical, ball bearing construction, rotary encoder without index that goes up to 3000 rpm.
The encoder comes with a 1 metre cable and 2 mounting screws.
Product Features:
This rotary encoder connects to:
|
Electrical
Response Frequency | 0 - 80KHz |
Supply Voltage | 5VDC |
Number of Pulses | 360 |
Output circuit | Push pull |
Mechanical
Shaft Diameter | 4mm |
Housing Diameter | 30mm |
Speed without sealing | 3000rpm |
Maximum load permitted on shaft | Radial 20N, Axial 10N |
Weight | Appr. 83g (with 1 meter cable) |
Environmental
Working humidity | 30-85% (No condensation) |
Working Temperature | -25°C - 85°C |
This rotary encoder connects to:
- 1057 - PhidgetEncoder HighSpeed
- 1047 - PhidgetEncoder HighSpeed 4-Input
The easiest way to connect your encoder to the 1057 or to the 1047 is to use a 3019 - HighSpeed Encoder Cable 50cm, cut it to the desired length and solder the encoder wires to the encoder cable as follows:
3530 - Encoder | 3019 - Phidget cable |
---|---|
Red | Red |
Black | Black |
White | White |
Green | Brown |