pH Phidget
Connect a pH probe or any voltage-based probe that uses a BNC connector to your VINT port with this isolated adapter.
For applications involving water quality and chemistry, this module is a great addition to your collection. You can use this adapter to measure one pH or voltage-based probe that uses a BNC connector. The ADP1000 connects to a port on a VINT Hub.
Isolated for Stability
The VINT connector on this board is electrically isolated from the probe connection, which allows the probe to be used in a solution that is electrically noisy. For example, it could be used in a tank containing pumps and other electronic equipment without any problems.
|
Sensor Properties |
|
|
Controlled By |
VINT |
|
±400mV Range |
|
|
Voltage Resolution |
40 μV DC |
|
Measurement Error Max |
± 0.1 % |
|
Sampling Interval Max |
60 s/sample |
|
Sampling Interval Min |
50 ms/sample |
|
Voltage Noise |
65 μV DC |
|
PHSensor Mode |
|
|
pH Resolution |
0.0007 |
|
Measurement Error Max |
± 0.1 % |
|
Sampling Interval Max |
60 s/sample |
|
Sampling Interval Min |
50 ms/sample |
|
pH Noise |
0.0011 |
|
±2V Range |
|
|
Voltage Resolution |
200 μV DC |
|
Measurement Error Max |
± 0.5 % |
|
Sampling Interval Max |
60 s/sample |
|
Sampling Interval Min |
50 ms/sample |
|
Voltage Noise |
235 μV DC |
|
Voltage Sensor |
|
|
Sensor Input Impedance |
1 TΩ |
|
Number of Voltage Inputs |
1 |
|
Electrical Properties |
|
|
Current Consumption Min |
6 mA |
|
Current Consumption Max |
* 10 mA |
|
Physical Properties |
|
|
Operating Temperature Min |
-40 °C |
|
Operating Temperature Max |
85 °C |
* - Varies depending on selected data interval. See the technical section of the User Guide for details.
