4.00" Precision Disk Wheel (2 pack)

Product Code:
DISK-WHEEL
As low as £6.36 £5.30

The precision disk wheels are available in three colours.

  • Available in red, blue, or black
  • 2 in a pack
4.00" Precision Disk Wheel (2 pack) Black 4.00" Precision Disk Wheel (2 pack) Red 4.00" Precision Disk Wheel (2 pack) Blue 4.00" Precision Disk Wheel dimensions
4.00" Precision Disk Wheel (2 pack) Blue

The rubber traction lip is held tightly in place by the deep cavity in the rubber ring. The durometer of the traction ring is 70 shore A.

The wheels can easily hold up to 15 pounds without flexing. 

Helpful Wheel Formulas:

X = Wheel Diameter
Y = Motor RPM

inches / second = XY(3.14159) / 60
feet / second = XY(3.14159) / 720
miles per hour (MPH) = XY(3.14159) / 1056

Example: X= 4” Wheel Diameter
Y = 20 RPM Motor

inches / second = 4 x 20 x 3.14159 / 60 = 4.19 in/sec
feet / second = 4 x 20 x 3.14159 / 720 = 0.35 ft/sec
miles per hour (MPH) = 4 x 20 x 3.14159 / 1056 = 0.238 MPH

Have a look at here for more products...
Image Product Name Description Price Action
Face Tapped Clamping Hubs, 0.770" Pattern

Our clamping mounts offer a cost effective way to attach hub mount gears or wheels to a shaft. 

View Detail...
As low as £6.60 £5.50
Clamping D-Hubs (Tapped), Bore 0.250" (545619)

Clamping D-hubs are a fantastic solution for transferring power from a shaft to the hub.

  • Bore 0.250"
View Detail...
£8.22 £6.85
6mm Bore Set Screw D-Hubs (Tapped), 0.770" Pattern

Set screw D-hubs are a fantastic solution for transferring power from a shaft to the hub. While conventional hubs with a cylindrical bore rely solely on the set screw to keep the hub from slipping on the shaft, the new D-hubs have a D-shapedView Detail...

£6.58 £5.48
0.0770" Set Screw Hub 3mm Bore

Set Screw Hubs are used to attach hub mount gears or wheels to a shaft.

  • Bore: 3mm
View Detail...
£5.52 £4.60
Product Enquiry