You have no items in your shopping cart.
Product Code: GMWWSExcl. VAT: £1.89 Incl. VAT: £2.27
Due to the longer shaft lengths on the GM2 and GM3, the encoder wheel reflector is a bit too far away from the sensors on the Wheel Watcher.
Use this spacer to bring the reflector back into range.
Product Code: M1.7x0.35Excl. VAT: £0.18 Incl. VAT: £0.22
This 1.7 (dia) x 0.35 (mm/thd) x 4mm long bolt exactly matches the unique thread on the two bolt-holes on the faceplates of the GM11a, GM12a, GM13a, and GM14a gear motors.
If you are looking for a way to precisely mount your motor, these bolts make the job much easier!
Motor not included
Product Code: GMB28Excl. VAT: £1.32 Incl. VAT: £1.58
The provided mounting holes in the GM2/GM8 gear motors are a convenient way to mount these to your project, but sometimes you just need a different way to mount them.
These precision laser-cut steel brackets match the features on the gear motor, and securely clamp them down to your project.
Use any #4-sized screw or nut/bolt for assembly.
Product Code: GM17Excl. VAT: £4.90 Incl. VAT: £5.88
This gearmotor is designed for low-voltage power-efficiency, but it isn't scared of generating a bit of torque.
The output shaft is shaped just like the GM2/3/8/9 for full accessory compatibility.
A High-Efficiency (HE) 3V DC motor coupled to a 228:1 gearbox give you a very useful low-power gearmotor!
Product Code: GM3Excl. VAT: £4.90 Incl. VAT: £5.88
This model differs from the GM2 in that it has a 90 degree output shaft.
This motor offers 50 in.oz of torque, rotating 360 degrees every 1.6 seconds (38 rpm - just a hair slower than a servo), at 5V, drawing 600mA at stall (free running at 52mA).
Minimal Price: £0.18