Hitec HS322HD Servo

Product Code:
HS322HD
£15.28 £12.73
  • Buy 5 for £9.18 £7.65 each and save 40%
  • Buy 10 for £9.00 £7.50 each and save 41%

The HS-322HD improves on Hitec's Standard Sport Servo by utilizing the new revolutionary "Karbonite" gear train.

Karbonite is four times stronger than our standard white nylon gears and even after hundreds of thousands of cycles it will not show any signs of wear. Karbonite™ gears and our custom IC make the HS-322HD a great choice for an economical sport servo.

4.8Volt to 6Volt Operation

  • Torque 4.8v/6.0v 3.0/3.7kg.cm
  • Speed 4.8v/6.0v  0.19/.015 secs
Hitec HS322HD Servo
Hitec HS322HD Servo
  • Torque 4.8V/6.0V – 3.0/3.7kg.cm
  • Speed 4.8V/6.0V – 0.19/.015 secs
  • Size – 40 x 20 x 36.5mm
  • Weight – 43g
  • Bearing Type – Nylon Bushing
  • Required Pulse: 3-5 Volt Peak to Peak Square Wave
  • Operating Voltage: 4.8-6.0 Volts
  • Operating Temperature Range: -20 to +60 Degree C
  • Operating Speed (4.8V): 0.19sec/60° at no load
  • Operating Speed (6.0V): 0.15sec/60° at no load
  • Stall Torque (4.8V): 42 oz/in (3.0 kg/cm)
  • Stall Torque (6.0V): 51 oz/in (3.7 kg/cm)
  • Current Drain (4.8V): 7.4mA/idle and 160mA no load operating
  • Current Drain (6.0V): 7.7mA/idle and 180mA no load operating
  • Dead Band Width: 5usec
  • Operating Angle: 40 Deg. one side pulse traveling 400usec
  • Direction: Clockwise/Pulse Traveling 1500 to 1900use
  • Motor Type: Cored Metal Brush<
  • Potentiometer Drive: 4 Slider/Direct Drive
  • Bearing Type: Top/Resin Bushing
  • Gear Type: Heavy Duty Resin
  • Connector Wire Length: 11.81" (300mm)
Product Enquiry