3209_0 SpringRC Standard Servo Motor (SM-S4505B)

Product Code:
3209
£13.22 £11.02
  • Buy 5 for £11.95 £9.96 each and save 10%
  • Buy 10 for £11.66 £9.72 each and save 12%
  • Buy 50 for £10.85 £9.04 each and save 18%
  • Buy 100 for £10.21 £8.51 each and save 23%

The baseline SpringRC model, this affordable servo has 180° of travel and 3.5 kg·cm of torque.

3209_0 SpringRC Standard Servo Motor (SM-S4505B) 3209_0 SpringRC Standard Servo Motor (SM-S4505B)
3209_0 SpringRC Standard Servo Motor (SM-S4505B)

The 3209 is a standard size RC servo with mixed gears, double ball bearing and produces 3.5 kg-cm of torque at 4.8V. RC servos are hobbyist remote control servos typically used in radio-controlled models, where they provide actuation for various mechanical systems such as the steering of a car, the flaps on a plane, or the rudder of a boat. These servos are not industrial grade and are not recommended for continuous heavy use.

Connection

This servo can be controlled by an RC servo controller.

Comes Packaged With

Accessories

Motor Properties

Motor Type Limited Rotation Servo
Range of Rotation 180°
Maximum Speed at Rated Voltage 400°/s
Rated Torque 3.5 kg·cm

 

Physical Properties

Gear Train Material 1 Metal, 4 Plastic
Bearing Type Dual Ball Bearing
Motor Length 36 mm
Motor Width 40.3 mm
Motor Depth 20.2 mm
Weight 39 g

 

Electrical Properties

Rated Voltage 5 V DC
Rated Current (on 1061 controller) 230 mA
Rated Current (on 1066 controller) 250 mA
Stall Current (on 1061 controller) 1.1 A
Stall Current (on 1066 controller) 450 mA

Servo Controllers

FUNCTIONAL

This servo motor needs to be connected to a servo controller board. If you're looking for higher torque, you should select a servo controller with an external power jack so it doesn't have to rely solely on USB power, which is limited. You can plug this servo directly to any of the boards in the list below by matching the color of the wire with the label on the board. Note that some servos have a white data wire and others have a yellow one- in both cases this wire corresponds to the "W" pin on the servo controllers.

Product Enquiry