3274_2 24V/173.3Kg-cm/15RPM 168:1 DC Gear Motor
The 3274_1 is a 24 volt gear motor, generating 173 Kg-cm of torque at 15 RPM. It's a large motor that provides lots of torque, even at higher speeds.
- 12mm Shaft
This revision of the 3274 is the same as the previous revision except that it has a metal plate on the back to make encoder mounting possible.
The 3274 is a 24 volt gear motor, generating 173 Kg-cm of torque at 15 RPM. It's a large motor that provides an amazing amount of torque.
The planetary gearbox on this motor is more sophisticated than a typical spur gearbox and will provide greater efficiency, higher torque, and quieter motor operation.
The 3274 DC motor connects the 1065 - PhidgetMotorControl 1-Motor
If you want to have precise position control, the mounting holes and rear shaft of this motor are compatible with the 3531 - Optical Rotary Encoder HKT22
|Motor Type||DC Motor|
|Output Power (Mechanical)||30 W|
|Maximum Speed at Rated Voltage||15 RPM|
|Rated Torque||136.6 kg·cm|
|Stall Torque||1.2 Mg·cm|
|Rated Voltage||24 V DC|
|Rated Current||2.2 A|
|Stall Current||10.8 A|
|Shaft Diameter||12 mm|
|Wire Length||300 mm|
|Gear Ratio||167 601⁄625 : 1|
|Number of Gear Trains||4|
|Maximum Strength of Gears||460 kg·cm|
|Shaft Maximum Axial Load||200 N|
|Shaft Maximum Radial Load||100 N|
|3254_0 12V/0.2Kg-cm/230RPM 10:1 DC Gear Motor||
This DC motor has a 10:1 gearbox, a rated speed of 230 RPM and rated torque of 0.2 Kg·cm.
|3255_0 12V/0.3Kg-cm/127RPM 18:1 DC Gear Motor||
This DC motor has a 18:1 gearbox, a rated speed of 127 RPM and rated torque of 0.31 Kg·cm.
|3256_0 12V/0.8Kg-cm/46RPM 50:1 DC Gear Motor||
This DC motor has a 50:1 gearbox, a rated speed of 46 RPM and rated torque of 0.82 Kg·cm.
|3257_0 12V/1.6Kg-cm/23RPM 100:1 DC Gear Motor||
This DC motor has a 100:1 gearbox, a rated speed of 23 RPM and rated torque of 1.63 Kg·cm.