L12-10-100-06-S

L12-S Micro Linear Actuator with Limit Switches

£83.69 £69.74

The L12-S comes with end-limit switches that will turn off power to the motor when the device reaches 1mm of the end of stroke. Internal diodes allow the actuator to reverse away from the limit switch.

Or

The limit switches are set at the factory and are not adjustable.

Our S series are our simplest micro linear actuators. Apply voltage to the device and it will extend, reverse the polarity and it will retract. This can be accomplished manually with a DPDT (Double-Pole Double-Throw) switch, wirelessly using our wireless linear actuator controller or using an H Bridge circuit. Our "S" series actuators can not be used with the LAC control board. 

The L12-S is is very compact and weighs in at 28g-56g, depending on the stroke length that you choose. It's size makes it an ideal device for robotics applications as well as other projects with tight space and weight requirements.

Some industries where the L12-S actuator is in use:

  • Medical devices
  • Aviation 
  • Aerospace
  • Simulation
  • Commercial transport

The L12-S line includes 24 unique models featuring: 

  • Optional stroke lengths of 10mm, 30mm, 50mm or 100mm
  • 3 gearing options for maximum forces between 22N (5lbs) and 80N (18lbs) and speeds between 6.5mm/s and 25mm/s
  • All models available in either 6V or 12V
Resources:

L12 Series 3D Models (IGES) 10, 30, 50 and 100mm: L12 3D Models (IGES)
L12 Series 3D Models (STP): L12 3D Models (STP)