SPTD485HW Tilt System

Product Code:
£110.44 £92.03

The SPTD485 is the perfect camera or sensor tilt.

Manufactured from extremely strong ABS plastic and aluminum enables this mount to handle all types of applications.

  • Ratio: 5:1
  • Assembled : No
SPTD485HW Tilt System SPTD485HW Tilt System SPTD485HW Tilt System SPTD485HW Tilt System SPTD485HW Tilt System SPTD485HW Tilt System
SPTD485HW Tilt System

Precise feedback is provided by the military grade, stainless steel potentiometer supplied. The main shaft is 1/4” stainless steel and is supported by an ABEC-5 ball bearing.  The 32 pitch gears are made from 7075-T6 aluminum (spur) and H59 hardened brass (pinion) and are offered in ratios from 2:1 to 7:1.

The SPTD485 is designed so that the power from the servo is transferred directly to the spur gear which is bolted to the attachment hub; no power is transferred through the shaft and therefore no slippage can occur. Mounting various cameras or custom attachments is simple with the 1/4” holes in the top plate.

Gear ratios can be easily changed to vary the power and speed. The base of SPTD485 tilt system has the .770” hub pattern which will mate up to any of our pan systems that utilize this same pattern. Build your own custom SPTD485 by choosing the ratio you need, assembled or in kit form. Patented

*We highly recommend purchasing this unit assembled by our factory. If you are not accustomed to using a soldering iron or handling delicate parts, please order this product assembled ready to plug into your receiver or servo controller. It is money well spent.

Unassembled – Kit form with the required hardware, plates and unmodified servo. Entails soldering and manipulating small parts inside the servo and fastening frame together with included hardware. (assembly instructions included)

Dimensions 4.55" x 2.25" x 3.23"
Product Weight 8.65 oz.
Maximum Payload 2 lb
Servo Included

D485HW Servo


Product Enquiry