3422_0 Spiral Beam Coupling 6-6mm
- Buy 5 for £8.96 £7.47 each and save 10%
- Buy 10 for £8.75 £7.29 each and save 12%
- Buy 50 for £8.17 £6.81 each and save 18%
- Buy 100 for £7.69 £6.41 each and save 23%
This beam type coupling can be used to connect two 6mm shafts together. Each shaft is held in place by two set screws, allowing for easy installation.
The spiral cut design allows for up to 2° of bending from angular misalignment and up to 0.12mm eccentric misalignment. .
If you're having trouble with slipping, you can file a groove into the shaft where the set screws hold it in place.
You can also use a Loctite adhesive on the set screws to ensure that they remain in place.
|Manufacturer Part Number||CL1-19-6mm|
|Coupling Rated Torque||4.1 kg·cm|
|Coupling Rated Speed||10000 RPM|
|Torsional Stiffness||100 N·m/rad|
|Shaft Angularity Tolerance||2°|
|Shaft Eccentricity Tolerance||120 μm|
|Screw Thread Size||M4|