DRV8876 Single Brushed DC Motor Driver Carrier

Only 1 left
Product Code:
4036
£7.04 £5.87

This compact breakout board for TI’s DRV8876 motor driver offers a wide operating voltage range of 4.5 V to 37  and can deliver a continuous 1.3 A (3.5 A peak) to a single bidirectional brushed DC motor.

DRV8876 Single Brushed DC Motor Driver Carrier DRV8876 Single Brushed DC Motor Driver Carrier
DRV8876 Single Brushed DC Motor Driver Carrier

The DRV8876 also features integrated current sensing and regulation as well as built-in protection against under-voltage, over-current, and over-temperature. The carrier board adds protection against reverse voltage.

This product is a carrier board for Texas Instruments’ DRV887x family of motor drivers; we therefore recommend careful reading of the corresponding driver’s datasheet before using this product. Three pin-compatible versions are available that differ in the amount of current they can deliver while supporting the same 4.5 V to 37 V operating voltage ranges and control interfaces.

This carrier for TI’s DRV8876PWP motor drier can supply continuous currents up to about 1.3 A and can tolerate peak currents up to 3.5 A. Since this board is a carrier for the DRV8876, we recommend careful reading of the DRV8876 datasheet. The board ships populated with all of its SMD components, including the DRV8876.

Motor driver:

DRV8876

Motor channels:

1

Minimum operating voltage:

4.5 V

Maximum operating voltage:

37 V

Continuous output current per channel:

1.3 A

Peak output current per channel:

3.5 A

Current sense:

2.49 V/A

Maximum PWM frequency:

100 kHz

Minimum logic voltage:

1.8 V

Maximum logic voltage:

5.5 V

Reverse voltage protection?:

Y

Header pins soldered?:

N

Size

0.6" x 0.7"

Weight

0.9g

Product Enquiry