DCM4105_0 42 DMW61 NEMA17 Brushless Motor with 106:1 Gearbox

Product Code:
DCM4105_0
£112.37 £93.64
  • Buy 5 for £105.01 £87.51 each and save 7%
  • Buy 10 for £99.14 £82.62 each and save 12%
  • Buy 50 for £92.24 £76.87 each and save 18%
  • Buy 100 for £86.75 £72.29 each and save 23%

This 8-pole BLDC gear motor can output 193.7 kg-cm of torque at speeds of up to 38 RPM. The shaft has a 4mm keyway for better coupling.

DCM4105_0 42DMW61 NEMA17 Brushless Motor with 106:1 Gearbox DCM4105_0 42 DMW61 NEMA17 Brushless Motor with 106:1 Gearbox
DCM4105_0 42DMW61 NEMA17 Brushless Motor with 106:1 Gearbox

The DCM4105 is a 24 volt brushless DC motor, generating 190 Kg-cm of torque at 38 RPM. The shaft is equipped with a 4mm key to improve coupling.

Brushless DC motors provide convenient position and velocity control through the use of their built in hall-effect sensor. They run quieter and last longer than their brushed counterparts. The 106:1 planetary gearbox on this motor results in higher torque at the cost of speed.

Connection
This motor must be controlled by a brushless DC motor controller that has the capability to both send control signals to the three motor wires, and also read the hall-effect feedback from the other five wires.

This diagram shows how to connect the motor wires to the controller.

Note: Because of the way this motor is built, you'll need to set negative P, I and D values when using the MotorPositionController object.

Note: Make sure to unplug the power cord from the motor controller before switching wires around.

Motor Properties

Motor Type

Brushless DC Motor

Number of Poles

8

Manufacturer Part Number

42JXGT200K(106)/42DMW61-2440

Output Power (Mechanical)

50 W

Rated Torque

193.7 kg·cm

Rated Speed

38 RPM

Electrical Properties

Rated Current

3.5 A

Rated Voltage

24 V DC

Coil Resistance

740 mΩ

Physical Properties

Shaft Diameter

10 mm

Mounting Plate Size

17

Operating Temperature Min

-20 °C

Operating Temperature Max

40 °C

Gearbox Properties

Gearbox Type

Planetary Gearbox

Gear Ratio

105 5/8 : 1

 

Comes Packaged with:

This motor comes with a 5-Pin molex connector soldered to the hall effect wires, and ferrules crimped onto the motor wires so it can quickly and easily be connected to the Brushless DC Motor Phidget as shown in the functional picture.

Have a look at here for more products...
Image Product Name Description Price Action
VINT Hub Phidget

The core of our product line, the USB VINT Hub has 6 VINT ports allowing for endless possibilities for USB sensing and control.

View Detail...
£34.99 £29.16 As low as £29.39
Wireless VINT Hub

The Wireless VINT Hub is the easiest way to use Phidgets in locations far away from a computer.

View Detail...
£69.98 £58.32 As low as £64.94
DCC1100_0 Brushless DC Motor Controller

Control a brushless DC motor from your VINT Hub. The hall effect input enables easy position and velocity control.

View Detail...
£75.82 £63.18 As low as £63.70
Product Enquiry