+44 (0) 1761 234 328

(0) items

£0.00

You have no items in your shopping cart.

Arduino Adapter For Raspberry Pi

Product Code: 103990079
Excl. VAT: £34.65 Incl. VAT: £41.58
You will earn 34 Robo Points for buying this product

Arduino is a massive ecosystem, if there's a way for the Raspberry Pi GPIO interface to adapt to Arduino pinouts, it is possible to use the Pi together with vast Arduino shields and hardware/software resources. The ARPI600 is just intended for this.


What's more, the ARPI600 also support XBee modules, make it easy to add wireless feature to your great project.

Supported Pi: Raspberry Pi 1 Model A+, Pi 1 Model B+, and Pi 2 Model B

Features:

  • Compatible with Arduino UNO, Leonardo, easy to connect with various Arduino shields
  • XBee connector for connecting various XBee modules
  • Sensor interface for connecting various sensors
  • Onboard USB TO UART for serial port debugging, also can be configured as XBee USB adapter
  • Onboard ADC, 10 bit, 38KSPS, 11 channels (6 channels for Arduino interface, 5 channels for sensors)
  • Onboard RTC

Pinouts:

  • 1.Arduino connector : for connecting Arduino shields
    1.2.ICSP interface : Arduino ICSP
    2.XBee connector : for connecting XBee communication modules
    3.Sensor interface : for connecting sensors
    4.Raspberry Pi connector : for connecting Raspberry Pi
    5.USB TO UART
    6.TLC1543 : AD converter
    7.PCF8563 : RTC
    8.CP2102
    9.32.768KHz crystal : for RTC
    10.Power indicator
    11.XBee state LED
    12.XBee and Arduino interface RESET button
    13.XBee EASYLINK button
    14.RTC battery holder : for CR1220 button battery
    15.TLC1543 reference voltage configuration jumper
    16.RTC jumper
    17.UART jumper
    when connecting P_RX and CP_TX, P_TX and CP_RX respectively, USB TO UART is connected to Raspberry Pi serial port
    when connecting XB_RX and CP_TX, XB_TX and CP_RX respectively, USB TO UART is connected to XBee serial port
    when connecting XB_RX and P_TX, XB_TX and P_RX respectively, Raspberry Pi serial port is connected to XBee serial port
    18.Arduino AD selection jumper
    short 2 and 3 : Arduino A0-A5 as AD input
    short 1 and 2 : Arduino A0-A5 as digital control
    19.Arduino I2C selection jumper
    short the jumper : Arduino A4-A5 as I2C control (the A4-A5 of Arduino AD selection jumper should be opened)
    20.Arduino SPI selection jumper
    short 1 and 2 : Arduino D11-D13 as SPI control (default)
    short 2 and 3 : Arduino D11-D13 as digital control

Whenever possible, items which are in stock are dispatched the same day, or the next working day.

Large and/or heavy items are dispatched by UPS courier service and these orders must be placed before 15:00hrs (GMT) to ensure same day dispatch.

Small items are normally sent using a Royal Mail service for UK orders, and International Airmail or UPS for overseas orders

Returns Policy

Arduino Adapter For Raspberry Pi top view
0

Enquiry Us

Post your comment

Active Robots