24V 5A Dual H-Bridge Motor Driver

Product Code:
MD49
£52.20 £43.50

Designed to work with our EMG49 gear motors, the MD49 will drive two motors.

  • Voltage - 24v only.
  • Current - Up to 5A for each motor.
  • Encoder - Processes quadrature encoder inputs of 588 counts per wheel turn from the EMG49 motor.
  • Size - 109mm x 66mm
  • Features Under & Over voltage protection, motor short circuit protection.
MD49 side 2 MD49 side1
MD49 side 2

Voltage - 24v only. 
Current - Up to 5A for each motor. 
Encoder - Processes quadrature encoder inputs of 980 counts per wheel turn from the EMG49 motor. 
Size - 109mm x 66mm 
Features Under & Over voltage protection, motor short circuit protection.

Examples
Arduino
 - control using the serial interface and display using the LCD05
PIC18F4410 - 
driving the motor and displaying variables on the LCD05
Picaxe18x - 
Serial communication example
Raspberry Pi
Use the serial port to drive the MD49 motors and display the encoder values

Product Enquiry