(0) items

£0.00

You have no items in your shopping cart.

Bipolar Stepper Motor Controller

With features like adjustable current limiting and selectable microstep resolutions, these drivers make it easy to get a stepper motor running with simple step and direction control interfaces.

1 to 10 of 11 total

Grid  List 

Page:
  1. 1
  2. 2
  1. DRV8825 Stepper Motor Driver Carrier close up

    DRV8825 Stepper Motor Driver Carrier, High Current

    Product Code: 2133
    Excl. VAT: £7.15 Incl. VAT: £8.58

    This breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver features adjustable current limiting, over-current and over-temperature protection, and six microstep resolutions (down to 1/32-step).

    It operates from 8.2 V to 45 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (rated for up to 2.2 A per coil with sufficient additional cooling).

    View our full range of Bipolar Stepper motors

    • Size: 0.6" x 0.8"
    • Weight: 1.6g (without headers)

    Read more

    Add to Compare
  2. A4988 Stepper Motor Driver Carrier, Black Edition

    A4988 Stepper Motor Driver Carrier, Black Edition

    Product Code: 2128
    Excl. VAT: £5.60 Incl. VAT: £6.72

    Pololu's Black Edition A4988 stepper motor driver carrier is a higher-performance drop-in replacement for the original A4988 stepper motor driver carrier. It features a four-layer PCB for better thermal performance, allowing the A4988 microstepping bipolar stepper motor driver to deliver approximately 20% more current than our two-layer (green) version.

    This stepper motor driver lets you control one bipolar stepper motor at up to 2 A output current per coil.

    View our full range od Bipolar Stepper motors

    • Size: 0.6" x 0.8"
    • Weight: 1.5g (without headers)

    Read more

    Add to Compare
  3. MP6500 Stepper Motor Driver Carrier, Potentiometer Current Control with included header pins.

    MP6500 Stepper Motor Driver Carrier, Potentiometer Current Control

    Product Code: 2966
    Excl. VAT: £4.70 Incl. VAT: £5.64

    This breakout board for the MPS MP6500 microstepping bipolar stepper motor driver is Pololu’s latest stepper motor driver. The module has a pinout and interface that are very similar to that of our popular A4988 carriers, so it can be used as a drop-in replacement for those boards in many applications.

    The MP6500 offers up to 1/8-step microstepping, operates from 4.5 V to 35 V, and can deliver up to approximately 1.5 A per phase continuously without a heat sink or forced air flow (up to 2.5 A peak). This version of the board uses an on-board trimmer potentiometer for setting the current limit, and the board ships with 0.1″ male header pins included but not soldered in.

    Read more

    Add to Compare
  4. SparkFun Stepoko (front)

    SparkFun Stepoko

    Product Code: ROB-13155
    Excl. VAT: £146.30 Incl. VAT: £175.56

    The SparkFun Stepoko is an Arduino compatible, 3-axis control solution that runs grbl software and is able to connect to your computer to accept stepper motor commands.

    The Stepoko’s design and firmware are completely open source and it works with an open source Java based cross platform G-Code sending application to translate commands.

    Read more

    Add to Compare
  5. Big Easy Driver side view

    Big Easy Driver ROB-12859

    Product Code: ROB-12859
    Excl. VAT: £16.03 Incl. VAT: £19.24

    Each Big Easy Driver can drive up to about 2A per phase of a bi-polar stepper motor.

    It is a chopper microstepping driver which defaults to 16 step microstepping mode.

    Read more

    Add to Compare
  6. EasyDriver Stepper Motor Driver side view

    EasyDriver Stepper Motor Driver

    Product Code: ROB-12779
    Excl. VAT: £9.08 Incl. VAT: £10.90

    The EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver).

    The EasyDriver requires a 6V to 30V supply to power the motor and can power any voltage of stepper motor.

    Read more

    Add to Compare
  7. 8A Stepper Phidget

    8A Stepper Phidget

    Product Code: STC1002_0
    Excl. VAT: £77.76 Incl. VAT: £93.31 As low as: £72.16

    Control the position, velocity, and acceleration of a stepper motor from your VINT port with this powerful controller.

    Read more

    Add to Compare
  8. 2.5A Stepper Phidget

    2.5A Stepper Phidget

    Product Code: STC1001_0
    Excl. VAT: £38.88 Incl. VAT: £46.66 As low as: £32.66

    This compact Stepper Phidget gives you control of one bipolar stepper motor from a port on your VINT hub.

    Read more

    Add to Compare
  9. Stepper Phidget

    Stepper Phidget

    Product Code: STC1000_0
    Excl. VAT: £53.46 Incl. VAT: £64.15 As low as: £49.61

    Control the position, velocity, and acceleration of a stepper motor from your VINT port with this powerful controller.

    Read more

    Add to Compare
  10. 1067_0B Phidget Stepper Bipolar HC

    1067_0B Phidget Stepper Bipolar HC

    Product Code: 1067_0B
    Excl. VAT: £87.48 Incl. VAT: £104.98 As low as: £73.49

    The 1067_0B is identical to the 1067_0, except that you have the option of whether you want to include the USB cable.

    The 1067 – PhidgetStepper Bipolar HC allows you to control the position, velocity, and acceleration of one bipolar stepper motor. This is the product you want to use to control larger industrial steppers or for applications that need a lot of torque.

    Includes:

    • A Hardware mounting kit (4 nuts and bolts (M3), 4 plastic spacers)
    • A 5 Amp ATP Blade Terminal fuse

    Read more

    Add to Compare

1 to 10 of 11 total

Grid  List 

Page:
  1. 1
  2. 2
Bipolar Stepper Motor Controller

Minimal Price: £4.70

0

Enquiry Us

Post your comment

Active Robots