You have no items in your shopping cart.
Product Code: 103030000Excl. VAT: £8.60 Incl. VAT: £10.32
This Base Shield v2 expansion board, has 16 Grove connectors, making it convenient for you to use Grove products together. It is compatible with a series of Arduino products.
- Dimension: 2.1 x 2.7 inch
- LED indicator: The Green LED would be light up while powering.
Product Code: 104030019Excl. VAT: £23.16 Incl. VAT: £27.79E-paper might be the most lightweight and comfortable material to read. It reflects light instead of emits light to mimic the experience of conventional paper reading. And in this way much less power is consumed.Add to Compare
Product Code: DAQ1400_0Excl. VAT: £19.44 Incl. VAT: £23.33 As low as: £16.33
Reads one 4-20mA, frequency output, PNP/NPN or 5V sensor, and provides 12 or 24V without an external supply.
Most of the sensors sold at Phidgets are simple 0-5V devices that can be read directly from a VINT port. But sometimes, you need a special sensor, be it a 4-20mA pressure sensor or a frequency output flow meter. The Versatile Input Phidget aims to provide an interface for as many types of sensors as possible while still keeping its compact form and low price point. Listed below are the various options for this adapter:
Product Code: DAQ1500_0Excl. VAT: £29.16 Incl. VAT: £34.99 As low as: £24.49
Measure up to 2 load cells or Wheatstone Bridge-based sensors with this input module. Connects to a VINT port..
Bridge-based sensors are are a common type of resistive sensor that produce a very small voltage drop. Load cells, strain gauges, pressure sensors, and piezoelectric sensors are all examples of sensors that usually operate in this way.
Product Code: OPTOExcl. VAT: £36.64 Incl. VAT: £43.97
The I/O 24 Opto Input Board is a very useful accessory which allows the user to connect signals from 3 to 24V AC or DC to the I/O ports of either the USB I/O24, or the Ether I/O24 via 8 optically isolated input channels.
Product Code: 1002_0BExcl. VAT: £82.62 Incl. VAT: £99.14 As low as: £69.40The PhidgetAnalog 4-Output Produces a voltage over -10V to +10V at a maximum of ±20mA. If this current is exceeded an error will be thrown to notify that the voltage may have dropped below the setpoint.The voltage is produced with 12 bit resolution (4.8mV).
Product Code: 1010Excl. VAT: £77.76 Incl. VAT: £93.31 As low as: £65.32
Provides the full functionality of the 8/8/8 I/O board in a small DIP-36 package that is plugged in your own board.
If you want the 8/8/8 functionality but space is an issue, or you are building a number of units and want to eliminate wiring between boards, this is the way to go.
Product Code: 1011Excl. VAT: £48.60 Incl. VAT: £58.32 As low as: £40.82
Designed for customers who only need a couple of Analog Inputs, Digital Inputs or Digital Outputs, the dongle size Phidget Interface Kit 2/2/2 is ideal for projects where space is critical.
Product Code: 1012_2BExcl. VAT: £92.34 Incl. VAT: £110.81 As low as: £77.57
Use it to check the state of switches and push buttons, and/or to switch relays, solenoids, and LEDs.
The Digital Inputs are activated by an external voltage source, triggering on a wide voltage range: 4 to 30VDC. They provide built-in filtering, to eliminate false triggering from electrical noise. They can be used to convey the state of on/off devices, such as push buttons, limit switches, relays.
Minimal Price: £8.60