2823

30:1 Metal Gearmotor 37Dx68L mm with 64 CPR Encoder

Only 1 left
£37.31 £31.09

This gearmotor is a powerful 12V brushed DC motor with a 30:1 metal gearbox and an integrated quadrature encoder that provides a resolution of 64 counts per revolution of the motor shaft, which corresponds to 1920 counts per revolution of the gearbox’s output shaft.

Or

 

Dimensions:

Size: 37D x 68L mm1
Weight: 215 g
Shaft diameter: 6 mm²

 

General specifications:

Gear ratio: 30:1
No-load speed @ 12V: 330 rpm
No-load current @ 12V: 0.2 A
Stall current @ 12V: 5.5A³
Stall torque @ 12V: 14 kg·cm3
No-load speed @ 6V: 170 rpm4
No-load current @ 6V: 0.15A4
Stall current @ 6V: 3.0 A5
Stall torque @ 6V: 7.9 kg·cm5

Performance at maximum efficiency

Max efficiency @ 12V: 54 %
Speed at max efficiency: 280 rpm
Torque at max efficiency: 1.8 kg·cm
Current at max efficiency: 0.78 A
Output power at max efficiency: 5.1 W

 

General specifications

Lead length: 20 cm6
Encoders?: Y
Encoder resolution: 64 CPR

Notes:

1
Length measurement is from gearbox face plate to back of encoder cap (it does not include the output shaft). See dimension diagram for details.
2
D shaft.
Stalling is likely to damage the gearmotor. Stall parameters come from a theoretical extrapolation of performance at loads far from stall. As the motor heats up, as happens as it approaches an actual stall, the stall torque and current decrease.
This motor will run at 6 V but is intended for operation at 12 V.
5
Stalling is likely to damage the gearmotor. Stall parameters come from a theoretical extrapolation of performance at loads far from stall. This motor will run at 6 V but is intended for operation at 12 V.
6
May vary by a few centimeters.