3325

3325_0 42STH38 NEMA-17 Bipolar Stepper with 5.18:1

£55.49 £46.24

This NEMA-17 motor has an integrated Planetary gearbox with a 52/11 :1 ratio. It comes with the rear shaft exposed, so you can mount an encoder or shaft coupler.

 

Or

At the output of the gearbox, the step angle is a little under 0.35°. When using the step angle in calculations, you should derive the exact step angle by dividing 1.8° by the gearbox reduction ratio.

At 1.7 Amps, this stepper motor can produce a maximum torque of 18.6 kg-cm. However, the gearbox is only rated for 18 kg-cm of continuous torque. Loading this gearbox stepper beyond the torque rating of the gearbox will shorten its useful life.

The 3325 stepper motor connects to a bipolar motor controller such as the 1067 - PhidgetStepper Bipolar HC.

The following diagram shows how to connect the motor wires to the board connectors to produce a clockwise rotation in the stepper motor when increasing position. To wire for counter-clockwise rotation when increasing position, reverse the red and blue wires.

 

Note: Make sure to unplug the power cord from the motor controller before switching wires around.

The rear shaft of this motor can be equipped with the HKT22 Optical Encoder for applications where you need to keep track of the exact position, velocity, or acceleration of the motor.

The mounting holes on this motor are compatible with the 3338 - Mounting Bracket (NEMA17).

Resources:
warning Connecting the motor directly to a power supply will destroy the motor and void the warranty. If you want to check your motor make sure it is connected to a constant current / chopper drive controller.
 
Motor Properties
 
Motor Type Bipolar Stepper
Manufacturer Part Number 42STH38-1684B / 36JXS60K5.18
Step Angle 0.35°
Step Accuracy ± 5 %
Holding Torque 18 kg·cm
Rated Torque 18 kg·cm
Maximum Motor Speed 200 RPM

Electrical Properties

Recommended Voltage 24 V DC
Rated Current 1.7 A
Coil Resistance 1.7 Ω

 Physical Properties

Shaft Diameter 8 mm
Rear Shaft Diameter 3.9 mm
Mounting Plate Size NEMA - 17
Weight 457 g
Number of Leads 4
Wire Length 300 mm

 Gearbox Properties

Gearbox Type Planetary
Gear Ratio 5 211 : 1
Backlash Error 1 12°
Maximum Strength of Gears 18 kg·cm
Shaft Maximum Axial Load 49.1 N
Shaft Maximum Radial Load 98.1 N