32400

XBee USB Adapter

£33.04 £27.53
This adapter board is compatible with any XBee RF Module sold by Parallax, and provides a means to connect the XBee to a computer via a simple USB A to Mini-B cable. Once connected, this adapter board can be used to either configure the device using the X-CTU software available form Digi, or to use a computer to communicate with other XBee modules.
Or

This board is kitted with two 10-pin sockets with 2 mm spacing which can be soldered to the PCB for easy mounting of the XBEE RF Module. Also included is one 40-pin header with 0.1" spacing which can be soldered to the PCB for easy accommodation to a breadboard.

Therefore, basic soldering knowledge and tools are required for this product.

It is recommended that you have a USB A to mini B cable when using this product, such as the USB A to mini B Cable or USB A to Mini B Retractable Cable.

Features:

  • Four indicator LEDs allow easy feedback of module status 
  • Provides an easy interface for configuring the XBee Module using Digi’s X-CTU software 
  • No external power supply necessary when powered from a computer's USB port 
  • FTDI FT232RL chip included onboard for serial-to-USB conversion 

 

Associated Modules:

  • XBee 2mW Chip Antenna (XB24-ACI-001) 
  • XBee 2mW Wire Antenna (XB24-AWI-001) 
  • XBee Pro 60mW Chip Antenna (XBP24-ACI-001) 
  • XBee Pro 60mW Wire Antenna (XBP24-AWI-001)
  • Power requirements: 5V
  • Communication: USB
  • Operating temp range: -40 to +185 ┬░F (-40 to +85 ┬░C)