3500

3500_0 i-Snail-VC-10 Current Sensor

Only 1 left
£55.49
The 3500_0 i-Snail-VC is a self powered AC current transducer that provides a 0-5V dc analog signal proportional to the AC current flowing through the device wire window (sine wave RMS calibrated).
Or

The i-Snail-VC is a self powered AC current transducer that provides a 0-5V dc analog signal proportional to the AC current flowing through the device wire window (sine wave RMS calibrated).

The i-Snail-VC is ideal for load monitoring without the need for an external power supply. Factory calibrated, fixed ranges ensure superior accuracy and eliminate configuration and adjustments in the field, saving time and avoiding confusion. Color coded labels allow for easy identification of full scale range.

The 14.5mm (0.570") wire window accommodates a conductor up to AWG 2. Multiple turns of the primary wire may be used to alter the input range. Output voltage is clamped at 6.5V, and the unit delivers a linear output up to 120% overload (6V).

Note: The i-Snail current transducer measures the current in a single AC wire (either the positive or the negative). If you put the whole cable through the window the + and - wires will cancel each other out and the sensor will read a null current value.

Product Features

  • Economical method to monitor any AC electrical load
  • Built-in Current transducer
  • Wire Window accommodates up to AWG #2
  • Calibrated for 0-10A AC
  • Connects to any device with an Analog input
  • The formula for converting SensorValue into AC Amps (RMS) is: AC Amps (RMS) = SensorValue/100

 

 

Power Self powered by line current
CT Wire Window 13.7mm (0.54")
Range 0-10A
Output 0-5 VDC, proportional to RMS input current (sine wave)
Clamped at approx 6.5V
Linear to 120% overload (continuous)
200A overload (temporary)
Accuracy Better than 0.5% of full scale
Ripple less than 0.1% of output
Resolution 10mA
Enclosure L=2.5", W=1.6", H=0.9" (including terminal block)
UL94V-0 ABS Plastic
Dielectric Withstand 2.5kVRMS for one minute