1064_1B

1064_1B Phidget Motor Control HC

£140.76 £117.30

Control up to two DC motors with this controller. Monitors surges and overheating in the API and connects to a USB port.

Or

The PhidgetMotorControl HC allows you to control the angular velocity and acceleration of up to two high-current DC motors.

The 1064:

  • Provides bi-directional control to 2 DC motors
  • Requires external 6 to 15VDC Power Supply
  • USB port is isolated from the motor control outputs
  • Over voltage, over temperature, over current conditions are fed back to the API on the PC

Many variations of brushed DC motors exist: permanent magnet motors, electromagnet motors, coreless motors, linear motors... the PhidgetMotorController can be used with any of these. 

Comes Packaged with

Hardware

 

Hardware mounting kit:

  • 4x M3 Bolts (2cm Length)
  • 4x Plastic spacers (5mm Length)
  • 4x M3 Nuts

Controller Properties

API Object Name

MotorControl

Motor Type

DC Motor

Number of Motor Ports

2

Velocity Resolution

0.79 % Duty Cycle

Acceleration Resolution

1.9 % Duty Cycle/s

Acceleration Min

1.9 % Duty Cycle/s

Acceleration Max

1940 % Duty Cycle/s

Acceleration Time Min

52 ms

Acceleration Time Max

105 s

PWM Frequency Max

20 kHz

Board Properties

Controlled By

USB

API Object Name

DCMotor

Electrical Properties

Supply Voltage Min

6 V DC

Supply Voltage Max

15 V DC

Continuous Motor Current Max

(per motor) 14 A

Surge Current Max

(per motor) 32 A

Overcurrent Trigger

(combined) 50 A

Current Consumption Max

100 mA

Current Consumption Min

15 mA

USB Speed

Full Speed

Physical Properties

Recommended Wire Size

10 - 26 AWG

Operating Temperature Min

0 °C

Operating Temperature Max

70 °C