1032_0B

1032_0B PhidgetLED64 Advanced

£95.47 £79.56

This Phidget uses current control to adjust the brightness of up to 64 LEDs.

Or

The PhidgetLED 64 allows you to independently control 64 Light Emitting Diodes. Each LED can have the current limit set individually, and the brightness controlled from 0 to 100% within that limit using current control. These LED outputs can also be used to interface other devices that benefit from current control (such as buzzers, fans, and other small, simple electronics).

Most standard LEDs have forward voltages below 2.75 Volts, and can be used with the PhidgetLED by simply soldering them to a connector-wire and inserting the wire into any PhidgetLED board output. The forward voltage will default to 2.75V, and the maximum current defaults to 20mA.

Comes Packaged with

Hardware

 

  • Hardware mounting kit:
  • 4x M3 Bolts (2cm Length)
  • 4x Plastic spacers (5mm Length)
  • 4x M3 Nuts

 

Board Properties

Controlled By

USB

Number of LED Outputs

64

API Object Name

DigitalOutput

Physical Properties

Recommended Wire Size (Power Terminal)

12 to 26 AWG

Power Jack

5.5 x 2.1mm Center Positive

Operating Temperature Min

-40 °C

Operating Temperature Max

85 °C

Electrical Properties

Current Consumption Min

70 mA

Supply Voltage Min

6 V DC

Supply Voltage Max

15 V DC

Selectable Output Voltage Levels

1.7, 2.75, 3.9, 5.0 VDC

Output Current Limit Max

(Per LED) 80 mA

LED Current Limit Max

80 mA

LED Current Limit Resolution

1.3 mA

USB Speed

Full Speed