(0) items

£0.00

You have no items in your shopping cart.

Sensors

41 to 50 of 97 total

Grid  List 

Page:
  1. 3
  2. 4
  3. 5
  4. 6
  5. 7
  1. RFID Reader ID-20LA (125 kHz)

    RFID Reader ID-20LA (125 kHz)

    Product Code: SEN-11828
    Excl. VAT: £34.10 Incl. VAT: £40.92

    RFID (radio-frequency identification) is the wireless non-contact use of radio-frequency electromagnetic fields, for the purposes of identifying and tracking tags attached to objects.

    This is the ID-20LA, a very simple to use RFID reader module from ID Innovations. With a built in antenna, the only holdup is the 2mm pin spacing.

    Power the module, hold up a 125kHz card, and get a serial string output containing the unique ID of the card.

    Note: The new ID-20LA is essentially the same as the older ID-20, but has a lower input voltage.

    Read more

    Add to Compare
  2. SparkFun Digital Temperature Sensor Breakout - TMP102

    SparkFun Digital Temperature Sensor Breakout - TMP102

    Product Code: SEN-13314
    Excl. VAT: £4.95 Incl. VAT: £5.94

    The TMP102 is an easy-to-use digital temperature sensor from Texas Instruments. The TMP102 breakout allows you to easily incorporate the digital temperature sensor into your project.

    While some temperature sensors use an analog voltage to represent the temperature, the TMP102 uses the I2C bus of the Arduino to communicate the temperature. Needless to say, this is a very handy sensor that doesn’t require much setup.

    Read more

    Add to Compare
  3. SparkFun Humidity and Temperature Sensor Breakout - HIH6130 SEN-11295

    SparkFun Humidity and Temperature Sensor Breakout - HIH6130

    Product Code: SEN-11295
    Excl. VAT: £28.27 Incl. VAT: £33.92

    The HIH6130 is a digital output-type relative humidity (RH) and temperature sensor combined in the same package.

    This allows the RH measurement to be temperature compensated and provides a second, standalone temperature sensor output.

    Read more

    Add to Compare
  4. SparkFun HMC6343 Breakout Board SEN-12916

    SparkFun HMC6343 Breakout

    Product Code: SEN-12916
    Excl. VAT: £99.45 Incl. VAT: £119.34

    The HMC6343 is a fully integrated high end electronic compass module that can compute and give you a heading direction that’s accurate within a couple degrees.

    It is tilt compensated and is calibrated to handle magnetic distortions.

    This breakout board allows for easy use of the HMC6343. All that is required is power and I2C connections to a microcontroller so that the module can receive commands and send data back to the user.

    Read more

    Add to Compare
  5. Luminosity Sensor Breakout - TSL2561

    Luminosity Sensor Breakout - TSL2561

    Product Code: SEN-12055
    Excl. VAT: £3.60 Incl. VAT: £4.32

    The TSL2561 Luminosity Sensor Breakout is a sophisticated light sensor which has a flat response across most of the visible spectrum.

    Read more

    Add to Compare
  6. Temperature Sensor - TMP36

    Temperature Sensor - TMP36

    Product Code: SEN-10988
    Excl. VAT: £1.05 Incl. VAT: £1.26

    The TMP36 is a low voltage, precision centigrade temperature sensor.

    Read more

    Add to Compare
  7. HotPot Membrane Potentiometer 50mm

    HotPot Membrane Potentiometer 50mm

    Product Code: SEN-09091
    Excl. VAT: £15.75 Incl. VAT: £18.90

    When you need to track movement in a volatile environment, HotPot provides a thin and sealed form-factor with operating temperature tolerances of -40 to +85C.

    Read more

    Add to Compare
  8. Tilt-a-Whirl Breakout - RPI-1031

    Tilt-a-Whirl Breakout - RPI-1031

    Product Code: SEN-12011
    Excl. VAT: £3.80 Incl. VAT: £4.56
    The RPI-1031 tilt sensor is capable of sensing a change in orientation in four different directions: forward, back, left or right.

    Read more

    Add to Compare
  9. Current Sensor Breakout - INA169

    Current Sensor Breakout - INA169

    Product Code: SEN-12040
    Excl. VAT: £5.70 Incl. VAT: £6.84
    The INA169 is a “high-side current monitor,” which means that you place a resistor (a “shunt resistor”) on the positive power rail and the INA169 measures the voltage drop across that resistor.

    Read more

    Add to Compare
  10. Humidity and Temperature Sensor Breakout - HTU21D

    Humidity and Temperature Sensor Breakout - HTU21D

    Product Code: SEN-12064
    Excl. VAT: £9.80 Incl. VAT: £11.76

    The HTU21D is a low-cost, easy to use, highly accurate, digital humidity and temperature sensor. This sensor is ideal for environmental sensing and data logging and perfect for a weather stations or humidor control systems.

    All you need is two lines for I2C communication and you’ll have relative humidity readings and very accurate temperature readings as a bonus!

    Dimensions: 0.6 x 0.6"

    Read more

    Add to Compare

41 to 50 of 97 total

Grid  List 

Page:
  1. 3
  2. 4
  3. 5
  4. 6
  5. 7
Sensors

Minimal Price: £0.49

0

Enquiry Us

Post your comment

Active Robots