Sanyo Pancake Stepper Motor: Bipolar, 200 Steps/Rev, 50×16mm, 5.9V, 1 A/Phase

Product Code:
2299
£67.52 £56.27

This pancake bipolar stepping motor from Sanyo has a 1.8° step angle (200 steps/revolution).

It offers a holding torque of 2.2 kg-cm (30 oz-in), and each phase draws 1 A at 5.9 V.

This stepper motor’s flat profile (21 mm including the shaft) allows it to be used in places where more traditional stepper motors would be too bulky

Sanyo Pancake Stepper Motor: Bipolar, 200 Steps/Rev, 50×16mm, 5.9V, 1 A/Phase Sanyo bipolar stepper motor dimensions Sanyo bipolar stepper motor wiring diagram
Sanyo Pancake Stepper Motor: Bipolar, 200 Steps/Rev, 50×16mm, 5.9V, 1 A/Phase

This pancake bipolar stepping motor from Sanyo has a 1.8° step angle (200 steps/revolution). Each phase draws 1 A at 5.9 V, allowing for a holding torque of 2.2 kg-cm (30 oz-in). The motor has four color-coded wires terminated with bare leads: red and yellow connect to one coil; orange and blue connect to the other.

Dimensions:

  • Size: 50 mm square × 16 mm, (not including the shaft)
  • Weight: 150 g (5.4 oz)
  • Shaft diameter: 5 mm

General Specification:

  • Shaft type: single shaft
  • Steps per revolution: 200
  • Current rating: 1A (per coil)
  • Voltage rating: 5.9 V
  • Holding torque: 2.2 kg-cm (30 oz-in)
  • Resistance: 5.9 Ohm per coil
  • Inductance per phase: 3.2 mH per coil
  • Number of leads: 4
  • Lead length: 30 cm (12″)
  • Output shaft supported by two ball bearings
Product Enquiry